Good looking project man! keep at it!
Chris
Good looking project man! keep at it!
Chris
2wheel wrench spinner
FINALLY after jumping through hoop after hoop I finally was able to register my bike. I got the plates in the mil today.
My uncle never registered the bike when he bought it in 1999. I had to have a police officer run the vin make sure it wasn't stolen and send all this stuff to the state about the bike. THEN I had to take out a Surety Bond. It took a couple months, but the bike is registered.
I should be ordering everything (clip-ons, tires, etc etc) by the end of the week so I'll be making some major progress in the next couple weeks!
Sweet, thanks for keeping up with the progress. I love these ugly bikes
iPedal : AIM:BMXpORK : Milwaukee, Wi : SUICIDEDOORS
"You cannot help people permanently by doing for them, what they could and should do for themselves." -Abraham Lincoln
Jax Seat Cover did me very well in the past for the Olds Cutlass seats
Could try Crash for the seat upholstry, he just started playing with upholstry so it would likely be cheap
iPedal : AIM:BMXpORK : Milwaukee, Wi : SUICIDEDOORS
"You cannot help people permanently by doing for them, what they could and should do for themselves." -Abraham Lincoln
thier was a place on hwy 100(ryan road) and 27th street that did Great work on my dirtbike seat cover and a custom made cover for my dads boat. very good work fast turn around times and cheep prices. this was about 5-6 years ago tho. not sure if they are even there anymore.
bike looks good. how did you lower the front 3" ?
I think that guy came into our work here asking to set up a wholesale deal to do a couple bikes, but because we don't do alot of custom stuff.
iPedal : AIM:BMXpORK : Milwaukee, Wi : SUICIDEDOORS
"You cannot help people permanently by doing for them, what they could and should do for themselves." -Abraham Lincoln
David L.
2000 Suzuki GSX-R 600
1995 Camaro - Yeah it still broken
1993 CR-X del Sol Si -the stock 35+MPG Daily Driver
if i fill half' my tank with Shell V-Power gas, and the other half with Chevron with Techron will i have V-TEC gas?
www.ProjectCamaro.com
www.KieperRacing.com
www.JMRemodelingwi.com
Pictures!
Got my clip-ons today!
So I had to cut the brace that holds the gauges, turn signals, and headlight to the triple tree. It's made of metal and in order for the clip-ons to go in the space I needed them to some hacking was needed.
You can kinda see where it came off of.
Here's the piece off the bike.
The piece and my preferred method of cutting.
Sawing away. It cut through easier then I thought. I'm pretty sure it's made of aluminum so it cut easy.
One side done.
Two sides done.
BAM! Perfect fit.
Close up of how close everything is.
Finally get to sit on the bike and steer it with handlebars!
Feels damn good. Right now everything is just hand tight. You can see int eh pics the carbs are off the bike too. last weekend my uncle came over, who has more experience with carbs, and helped me clean the thing up. The bike would not have ran the way the carbs were. Things were all stuck and clogged up.
I also changed the oil.
I also bought some vinyl to wrap the seat in. Got a great deal on a bunch from the fabric store. I'm not that great at upholstering so we'll see how that turns out.
I'm hopin things will start wrappin up in the next couple weeks. Slowly but surely.
Looks like fun
iPedal : AIM:BMXpORK : Milwaukee, Wi : SUICIDEDOORS
"You cannot help people permanently by doing for them, what they could and should do for themselves." -Abraham Lincoln