Godswill my motor is going to be done soon. Iv been ordering parts and working on things with it for awhile now and I should have it up and running next week with pics and videos too.
Here is the setup let me know what your predictions are guys...
85 camaro stock open 3.08 rear
Motor is a 69-80 0010 350 4 bolt block. Bored .40 over making it a 357.
Using .015 thick steel shim head gaskets
Has Flat top 4 valve relief pistons
Comp cam .488/.490 lift 110 lsa 230/236 @ .050
High flow water pump
Mid mount alt setup
Edelbrock performer RPM intake
200 cc Dart iron eagle heads with 72 cc chambers-they are highly ported with 2.02 valves with guideplates and screw in studs
Speed o motive springs good for .550 lift
hardened push rods
1.5 long slotted steel rockers
Holly 750 vac sec carb fresh rebuild with new jets and accelerator pump nozzle
K&n 14" round airfilter
Hedman shortie headers
Hedman Y pipe
Gutted cat
Hooker Aerochamber catback
Tranny has been rebuild lass than 5k ago and said to have been rebuilt stronger by the shop
Everything minus the dash and front driver seat has been gutted
Car has a lightweight 2 inch fiberglass cowl hood
Let me know what you guys think the motor will make in power & as it stands in the 1/4.
Thanks fellas.