My 94 Silverado will be going under the knife this weekend.The trans is falling apart, and the motor is less than stellar in the performance department.Ive been gathering parts, while maintaining the "budget build" mentality.I planned to run the truck carb, no matter which motor (SBC or LSX) will stay in the truck for next year.Im not looking to dump a ton of money into the truck at once, but id like some advice as to which path to take.This truck is my daily driver, weekend track truck, and probably will take a beating somewhat frequently on the street when its nice out.Heres what i have now, what kinda numbers should i be looking at?....

94 TBI shortblock...untouched
624 heads...1.94/1.52s...studs/guideplates/springs/1.6 rockers/untouched ports
comp xe256... .449/.456 256/268 112LSA
Edelbrock performer RPM
Holley 650 double pumper

The truck will have a TH350 with 2400ish stall and 3.73s.I was told this should have a decent low-mid range...but its going to lose steam around 5200.I dont mind the low end, since the truck is somewhat heavy.Im looking for opinions on anything i could change to have the truck perform better or possibly better matched than what i have thrown together.I have plans to either build a 406 over winter, or switch to an LSX platform.