Lots of thirgen stuff

[OldSchoolSS]

Hi guys I've decided to get rid of all my thirdgen stuff. I need the garage space back. I live near Fond du Lac, WI. My zip code is 53006. I can ship out some of the smaller stuff and some of the larger lighter stuff. I prefer local sales though. If you want any of this stuff it goes to first come first serve. Prices are pretty firm unless it's a large item and you are local to me. Pictures can be provided upon request. But please only ask for pictures if you are serious about buying the items. I only have a connection that runs at 24kb/s so sending pictures is a pain in the ass. Well here is what is for sale. All prices are plus shipping.

1986 Camaro Z-28 Shell very solid no doors, no wiring harness, no hatch, no front clip, basically as gutted as can be comes with the rear-end. Would make a great starting point for a race car or a complete frame off restoration. Clean title $100.

1 Set of 82-92 z-28 doors, with glass and power window motors. These doors are decent there is some rust on the lower lip. $100 a pair or $50 each.

1 Set of 82-92 Camaro Doors, Cleaner than those listed above, these are manual crank door and come with the glass. $100 a pair.

1 Set of 82-92 Camaro Front Fenders, some rust no rot. $100 a pair.

1 82-92 Camaro Flat hood, good shape one small dent no rot $50.

3 82-92 Camaro Hatches. Two have defrost one does not. $50 each.

Complete Gray interior plastic pieces, They are in pretty good shape. $100 for all.

85 2.8 MPFI engine, 180,000 miles runs strong. $75.

85 V6 T5 Transmission, 80,000 on rebuild $75.

92 WC V6 T5 Transmission, 75k miles previous owner said it was in perfect shape $150.

91-92 Aero Ground Effects Compete set including front bumper cover and rear bumper cover. Plus the front steel bumper and Honeycomb great condition! $350.

91-92 Z-28 hood blisters, no broken studs Sold to cam91rs1

85-90 Z-28 Ground Effects, All there but need a little tlc to be 100% include front bumper cover lower spoiler plus rear bumper cover. $150.

2 Camaro Dash pads , One has a little crack on the corner that rests under the winshied and isn't visable when installed. The other has no cracks but has a little nick in the surface that could be repaired by a doctor vynil guy for $10 . $75 each

1 92-82 3:42 gear rear end, drum to drum $75 Sale Pending

1 90-92 Camaro dash with 110 mph V8 gauge cluster and wiring. Perfect condition $150.

1 light gray trunk security panel. This is the piece that installs in the trunk of a vehicle and has a lock on it so you can put valuables under it, it comes with rear trim piece but no key. $30 Sale Pending

1 82-92 Five speed console, complete and in decent shap. Shifter plate/boot sold have the rest of the console make an offer.

Also a set of old style IROC Wheels, they need some tlc. $100.

I have a lot of other parts that I can't think of right now. I also have a complete 85 V6 parts car. Two tilt steering columns. and a lot of other thirdgen stuff. Ask and I might have it. Please send all inquiries to scottsterr@gmail.com my ebay feedback is under camaro-man67, thanks for looking!

[Knyghtmare]

91-92 Aero Ground Effects Compete set including front bumper cover and rear bumper cover. Plus the front steel bumper and Honeycomb great condition! $350.

91-92 Z-28 hood blisters, no broken studs $100.


What color are all of these and in what shape is the paint?

[OldSchoolSS]

They are just in primer. I would strip them down to bare plastic and repaint them before I put them on a car.

Thanks,

Scott

[OldSchoolSS]

Knyghtmare - Are you still interested? Let me know there is a member on another board that is interested in the blisters but I'm giving you priority since you asked first.

Thanks,

Scott

[Knyghtmare]

Nah its ok, they can have them. Thanks.

[OldSchoolSS]

Alright thanks for the interest.

[loud91rs]

how much rust is on the rolling chassis? t tops? what can you all tell me about it. what color? power windows/locks? thanks.

[OldSchoolSS]

There isn't much rust on it at all. There was a little on the wheel lip on the rear quarters. There also was some in the seams on the rear wheel wells I already had prepped the area for patch panels. The floor has a bout two holes the size of a dime other than that it's as solid as can be. I looked for a long time to find a car this solid. Most were completely rotted away where the lower control arms attaches to the underbody. The car is a hartop car, but I do have a roof off of a t-top car and all the interior trim pieces, and mouldings plus the glass. I would sell all of that for what I paid for it $80 extra on top of the price of the car. If somebody bought the roller I would give them the the doors for a extra $25, they have power windows in them. The car is multiple colors red/black/primer

Thanks,

Scott

[theavenger333]

wish you had done this a little while ago, i'd of snatched up that 85 sixer and 5 speed

[slow90z]

Im really interested in the rolling chassis. Do you happen to have any pictures of the rust spots?

[OldSchoolSS]

I'll take pictures tomorrow. PonyKiller87 took a look at it when he picked up some parts. If you shoot him a PM he can tell you how solid it is.

Thanks,

Scott

[PonyKiller87]

Yeah I seen it, its pretty solid other than the part scott was talking about where he started to fix it around the rear wheel wells on the inside. Over all it looked pretty solid but it would still take some work to get it painted and looking good.

[slow90z]

Cool cool, ill see when me and my buddy could come get it. Ill let ya know soon.

[OldSchoolSS]

That sounds great, if you email me at scottsterr@gmail.com I'll reply with some pictures of the rust areas. Also did you want the doors with the rolling chassisr?

Thanks,

Scott

[slow90z]

Nah, im getting it because my car have is pretty clean interior wise, and the doors are good. Just mine has pretty rusty quarters, and id just like a body that I can slowly work on and weld a 12pt cage into and stuff like that. I dont need the t-top roof, because itd be pointless to have t-tops with a cage in my opinion. My buddy is cool with letting me use the trailer. SO... im going to be up north all weekend, but probably one of the weeknights next week. That work for you?

[PonyKiller87]

and weld a 12pt cage into

I just so happen to have a cage for sale very cheep. New it goes for $600, Im lookin to get $100 obo for it. If your interested Ill get you the specs and a picture of it.

[OldSchoolSS]

slow90z - That sounds good. That's good that it's a trailer. I forgot the previous owner took the rear inspection cover off the differential and didn't put it back on. I don't think you would make it that far with a dolly haha. Have a good weekend up north.

-Scott

[slow90z]

Thanks, had a really good time. My buddy couldnt get the trailer for last night, but is trying to see if he can use it this weekend. (He has a 70 cutlass on it right now).

[OldSchoolSS]

Sounds good. I'll be in madison saturday and sunday morning. But I'll be around friday night or my father will be home and he can help you guys out if you want to come on Saturday.

[OldSchoolSS]

Oops I got my weekends mixed up. I'll be home all this weekend and next weekend I'll be in madison. If you come Saturday it would be best if it was before 6:00, I have a bachelor party to go to.