-
350 and 377 stroker SBC
I have one fresh rebuild 350 vortec SBC. This is complete from the roller cam to the oil pan. I also have some vortec heads to make it a long block assemble if needed. I also have on stroker motor starting with a standard bore hyd. roller 880 vortec block with 4 bolt mains and set up for a external fuel pump if needed. All new eagle balanced parts and is a complete short block NO CAM. I have several hyd. roller cams if needed and some vortec heads to complete the motor. Call 920-901-9777
-
The 6 inch rodded 350 is sold so cross that one off you wish list. Also the 377 with the Speed Pro pistons is also gone. I still have one 377 with the same compression only with a set of KB pistons. Same set up, same price. I also just finished a 350 sbc Marine short block, this is the roller cam motor with the 395 hyd. roller and the larger 6qt oil pan. $900 with a Marine core motor in exchange. This is a great street motor with this cam 350hp and 400tq same as the 350 GM Ram Jet motor. Phone calls only 920-901-9777
-
I have one of the strokers left and one of the marine motors. Time to check the boat motor and see if you did get all the water out of it?
-
The 9.5-1 motor in 377ci is also gone. I did put together a new one with a flat top piston and has 10.3-1 compression with the same hyd roller cam set up blockl. I have a complete 4 bolt hyd roller cam block cleaned honed and set up for a new stroker in the lower compression if needed. As for the marine motors just one left. Call 920-901-9777
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules