Results 1 to 11 of 11
  1. #1
    Boost went where again? Silver86's Avatar
    Join Date
    Jul 2008
    Location
    Saukville
    Posts
    1,512

    any A/c unit pros in the house, i need help.

    we have a window a/c unit that is built into the wall. it is dead... and i have no clue what im doing.

    here i thought this would be a pretty straight forward removal/install, but here im still stuck on the removal.

    i have no clue how to remove this thing from the house. youd think there was a sleeve, but it doesnt look that way.

    some help would GREATLY be appreciated.
    - 86' rx7 - 06' mustang GT - 04' xterra SE -

  2. #2
    Ol' School awsomeears's Avatar
    Join Date
    Jun 2004
    Location
    Franklin , WI
    Posts
    4,502
    Take a picture of it, there are units called " Magic Paks " that are combo units and then there are OLD school A/C units from the late 70's early 80's that were built in.
    HVAC...
    Neons...
    House music...

    Quote Originally Posted by pOrk View Post
    - More naked bitches

  3. #3
    Boost went where again? Silver86's Avatar
    Join Date
    Jul 2008
    Location
    Saukville
    Posts
    1,512

    Ill snap some pics in the morning.
    - 86' rx7 - 06' mustang GT - 04' xterra SE -

  4. #4
    Boost went where again? Silver86's Avatar
    Join Date
    Jul 2008
    Location
    Saukville
    Posts
    1,512

    pics:



    - 86' rx7 - 06' mustang GT - 04' xterra SE -

  5. #5
    My old apartment had that exact same unit... Was put in new in 2009, probably as an older overstock model (the apartment management sucked and was cheap)...

    They do slide in from the front I believe... Whomever installed yours just put in trim to seal it. You will have to rip all that off from the outside...

    When ours was put in it came with the optional tray sleeve that you would permanently mount first and then just slide it into it. The apartment had it mounted just like yours, no sleeve, just caulked and sealed into place.

  6. #6
    I would try pulling the interior grill off first to see if it can be pulled into the house from the sleeve. The case would be secured to the house on the exterior under the trim pieces.
    1970 Chevelle SS
    2013 F150 SC 3.5 TT
    1975 CB400F
    2007 FLHTCU

  7. #7
    Boost went where again? Silver86's Avatar
    Join Date
    Jul 2008
    Location
    Saukville
    Posts
    1,512

    will have to wait till next weekend me thinks. as i will not have very much time to tinker with it.
    - 86' rx7 - 06' mustang GT - 04' xterra SE -

  8. #8
    signal 5-5-5-5 xxtremeteam's Avatar
    Join Date
    Mar 2006
    Location
    Port Washington
    Posts
    2,236

    we have a very similar set up two years ago it quit working it was a real sob to change couldnt find onr the same size so my landlord had to make the hole larger but ours came out through the inside of the house the unit pulled out and then the sleve had a few screws into it took the better part of a night to change
    EMT/Fire fighters- " this ain’t a job. It ain’t an occupation. It’s a calling. A need. A desire that you feel in your bones and your brains and your nut-sack."Tommy Gavin(Denis Leary)

  9. #9
    Grandpa Grocery Getter 2.0 wrath's Avatar
    Join Date
    Dec 2007
    Location
    Waukesha, WI
    Posts
    2,048
    I think I've seen this one before. Two screws near the bottom on the front bezel, bezel flips up. There is a screw for a grounding strap between the AC unit and the sleeve.
    Buy made in the United States. Otherwise your job might be next. Unless you already wear black shoes and a visor with golden arches on it to work in which case your fellow american has already failed you.

  10. #10
    Boost went where again? Silver86's Avatar
    Join Date
    Jul 2008
    Location
    Saukville
    Posts
    1,512

    fuck you a/c unit!

    silly the way it was installed. lets hope i can get the new unit put in sometime tomorrow.
    - 86' rx7 - 06' mustang GT - 04' xterra SE -

  11. #11
    Boost went where again? Silver86's Avatar
    Join Date
    Jul 2008
    Location
    Saukville
    Posts
    1,512

    a/c unit - 0

    me - 1

    just need to redo the flashing and the molding on the inside.
    - 86' rx7 - 06' mustang GT - 04' xterra SE -

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •