looking to sell my stroked small block chevy.
gm 4 bolt main 1 pc rear main seal block .030 over
scat 3.75" stroker crank
gm rods with arp bolts
flat top forged pistons 11.5:1 static compression ratio
S\r torquer iron heads 2.02/1.60 67cc chamber
dual valve springs (comp cams)
screw in studs
scorpion aluminum roller rockers 1.6 ratio
comp 4x4 extreme cam .550 lift 280 advertised duration roller cam and lifters
cloyes double roller timing chain
cloyes billet cover
melling oil pump
cnc aluminum fuel pump block off
billet specialties heartbeat valve covers (need repolished)
edelbrock rpm air gap intake permashine or w/e it is called
edelbrock water pump
billet distributor
march serpentine conversion
140 amp single wire alternator
agr power steering pump
included harmonic balancer and flexplate (was balanced at a complete rotating assembly
Combo was built to make 400+ hp on 93. Was built for my mud truck but the cam should be a good choice for street driver.
Asking 2000 obo for everything
or 1500 obo if you just want the longblock without all the accesories
got way more money tied up in this thing than im asking but we all know how that goes....
like everything open to some partial trades but really need cash for wedding
text anytime two6two-8O6-618O or call and leave message or PM me on here
Results 1 to 9 of 9
Thread: SBC 383 Complete For Sale
-
07-11-2011, 10:09 PM #1have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
SBC 383 Complete For Sale
-Patrick
I r teh have da kewl now cuz of that ^^^^^^
"It's not a racecar if it drives to the track and goes home on a flatbed apparently"
-
07-12-2011, 12:02 AM #2Obsessed
- Join Date
- Apr 2004
- Location
- West Allis, WI
- Posts
- 1,382
Pm sent
12 Suzuki Hayabusa Turbo
12 Suzuki Hayabusa LE
04 Pontiac GTO
72 Pontiac GTO
-
07-12-2011, 07:54 AM #3have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
replied
also I forgot to mention. Engine was built in 2003. Has approximately 5 miles on it and maybe 10 hours total run time. Has been only run on propane for those hours also. I am trying to find the build sheet or get a copy from the builder, but I am willing to partially tear down motor for a serious buyer if they want to verify the components I have listed.
-
07-12-2011, 08:54 AM #4RTCTTFMF
- Join Date
- Jul 2004
- Location
- someone elses car
- Posts
- 9,986
pat,is the motor still in the truck? I know a few people that may be interested but would like to hear it run.
Check out our NEW online store!
http://store.clocksoffracing.com/
-
07-12-2011, 09:36 AM #5have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
yes still in the truck... I need to put my 750 carb back together and get it on there first however
-
07-14-2011, 10:48 PM #6Obsessed
- Join Date
- Apr 2004
- Location
- West Allis, WI
- Posts
- 1,382
When will you be able to get it running?
12 Suzuki Hayabusa Turbo
12 Suzuki Hayabusa LE
04 Pontiac GTO
72 Pontiac GTO
-
07-15-2011, 12:16 PM #7have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
If the guy coming tomarrow doesn't buy it, shortly after that it will have a carb on it
-Patrick
I r teh have da kewl now cuz of that ^^^^^^
"It's not a racecar if it drives to the track and goes home on a flatbed apparently"
-
07-16-2011, 02:51 PM #8Obsessed
- Join Date
- Apr 2004
- Location
- West Allis, WI
- Posts
- 1,382
Keep me posted whether its sold or not. Thanks
12 Suzuki Hayabusa Turbo
12 Suzuki Hayabusa LE
04 Pontiac GTO
72 Pontiac GTO
-
07-17-2011, 06:17 AM #9have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
Sold.
Have the rpm gap intake and the 140 amp powermaster alternator left
Reply With Quote