I have been doing some research on NHRA rules as I start to build my car for the upcoming season and had some quesitons regarding fuel cell placement

Below is the following rule I am wondering about:

1.5 FUEL SYSTEMS
Location: All fuel tanks, lines, pumps, valves etc., must be outside of the driver's compartment and within the confines of the frame and/or steel body. Cool cans, in full-bodied cars, must be mounted a minimum of 6-inches (15.2 cm) forward of firewall. Fuel blocks must be located at least 6-inches (15.2 cm) forward of the flywheel/bellhousing area

Since I have a hatchback there is no real way for me to mount the fuel cell out of the driver compartment by means of sheet metal seperation. Here is a picture of one of the locations I could place my fuel cell:



Would this pass tech?

Any input would be greatly appreciated.

Thanks.