Results 1 to 20 of 20
  1. #1
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931

    1992 Mustang LX convertible - super clean!

    it absolutely kills me to do this, but i have no time for 2 cars.

    Up for sale is the 1992 convertible that I bought from DRK last August. The car is super clean. By far the cleanest fox i have ever come across in my days. There is less rust on the underside of this car then there is on my 2007. The car sounds great and looks better! As stated at the top of the page, I have no time for 2 cars, barely time for one, that is the reason for selling.

    There are currently 92,758 miles on the body. The only things that I really had planned to do to the car was to get the fiberglass hood painted and put a new top on it. The hood is unpainted and the top is a bit shrunk, so it closes a little hard. Other than that the car doesn't need much. There is one spot on the passenger side fender that looks like the paint was buffed off, the plan was to get that taken care of when the hood was sprayed. Also the ashtray is broken, go figure, LOL! I already installed the ash tray repair kit, I just need a new cover. The door bushings are a bit worn out, i have new ones, just haven't put them in yet. The low oil level sensor leaks a little oil. I also have a new one of those with a package of new washers, just never got the thing installed.

    I think I paid $5,000 back in August for the car, I would like to see $6200 for it. Since I bought it, I stuck a little into it. That little includes: new fuel pump relay, new outer tie rods, alignment, steel braided brake lines front and back, 2 new quarter window motors, 2 new door lock actuators, new black convertible boot, new master power window switch, and new power door lock switches, and a 3 gauge radio bezel pod. The car was given a cooling system pressure test and overall inspection by a Ford technician last summer also. I will be including in the sale the actual Ford Workshop Manuals for the car, the extra parts mentioned earlier, a stock fox hood that needs some cleaning, the stock gray convertible boot, and a few misc switches and whatnot. Here is the spec list that was provided to me when I bought the car:

    stock longblock
    - 65mm T/B
    - Aluminum under drive pulleys
    - BBK air intake
    - Billet aluminum brackets for the alternator and water pump
    - Large aluminum radiator
    - Flex-a-Lite Black Magic 5.0 fan kit
    - All new hoses
    - Energy Suspension poly engine mounts
    - UPR BLING!

    Exhaust
    - 1 5/8 Flowtech LT's
    - 3" x-pipe
    - 3" turbo mufflers and dumps

    Fuel & Electronics
    - Walbro GSS340 intank
    - MSD Blaster TFI coil
    - MSD 8.5 wires

    Drive Train & Brakes
    - World Class T-5
    - Findanza aluminum flywheel
    - King Cobra clutch
    - FMS aluminum drive shaft
    - Steeda Tri-Ax shifter
    - Steeda firewall adjuster
    - Steeda clutch quadrant
    - Energy Suspension poly transmission mount
    - Energy Suspension poly transmission cross member bushings
    - 4:10 Gears
    - 28spline Superior 5-lug axles
    - FMS Trac-Loc rebuild kit
    - New Drums, shoes, and all hardware in the rear
    - New 5-lug Fox rotors
    - Maximum Motorsport aluminum caliper sleeves

    Suspension& Wheels
    - Maximum Motorsport full length sub frame connectors
    - KYB GR-2 struts & shocks
    - SS.com CC plates made by J&M
    - UPR coil over kit with 10" 250lbs springs
    - AJE tubular front control arms
    - SS.com adjustable lower rear control arms, weight jacker style
    - Eibach lowering srings in the rear
    - Poly bushings in the rear housing and stock upper control arms
    - Black FR500s 17x10.5 / 17x9 with 315/35/17 Sumitomos in the rear and 255/40/17 Sumitomos in the front

    Misc
    - MSD digtal tach/shift light
    - Sony CD deck with remote
    - Headlight kit with clear corners
    - 83-86Ranger airdam
    - New battery
    - New Ford battery cables

    and here are a couple pics:



    the best way to reach me is my cell phone via text messaging, I can then get reception and call you. My cell works like crap in my house and will not ring. That number is (920) 980-2253. If texting isn't possible, call and leave a message if I do not answer. I get on here very little nowadays so PMs would be a bad idea. emailing me at eheimermann@hotmail.com would maybe work too. I work second shift, so 9 am - 1 pm is the best time to reach me. CASH is preferred, but I would take a bank check. Would need my bank to verify with your bank, but as long as your bank is fine with doing that, I am fine with a check.

    Perfect opportunity to own a clean as hell, great running fox.
    Last edited by 07ROUSHSTG3; 06-03-2010 at 10:56 AM.

  2. #2
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    i misunderstood DRK. the motor was not freshly rebuilt. he had just installed a different (used) long block 100 miles before i bought it.

  3. #3
    Resistance is futile. STANMAN's Avatar
    Join Date
    Jun 2007
    Location
    U will be assimilated.
    Posts
    4,914
    Interested in a trade for firearms?

  4. #4
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    lol, no. cash or bank check.

  5. #5
    I have seen this car in person and it's very clean and worth every penny!! Good luck with the sale Eric!!!

  6. #6
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    thanks for the props. i will miss it dearly. i know i will never find a cleaner one.

  7. #7
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    ugh...put it on the local craigslist. preparing for onslaught of stupid emails, LOL!

  8. #8
    definitely one of my favorites! good luck!

  9. #9
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    c'mon!! a hot looking, rust/dent free fox and nobody.

    $6000 to BCM members. that is as low as i am going.

  10. #10
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931













  11. #11
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    ttt

  12. #12
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    still taking up garage space.

  13. #13
    Newbie
    Join Date
    Nov 2009
    Location
    waupun
    Posts
    39
    i wil trade you a nice 1994 z28 camaro
    z28 man

    1979 camaro z28 4speed t-tops with well built 355 not dynoed yet goes pretty good

    1994 camaro z28 auto lt1 350 with gm lt4 hot cam also not dynoed yet just got together

  14. #14
    Senior Member..now yer posting! pnad's Avatar
    Join Date
    Jul 2005
    Location
    Hartland, WI
    Posts
    266
    I have been itching for a convertible...

  15. #15
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    Quote Originally Posted by pnad View Post
    I have been itching for a convertible...

  16. #16
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    link to EBAY classified. pretty much the same as on here, but it does allow you free access to the history report.

    http://cgi.ebay.com/ebaymotors/ws/eB...631#vi-content

  17. #17
    bored at work 07ROUSHSTG3's Avatar
    Join Date
    Mar 2007
    Location
    St. Cloud, WI
    Posts
    2,931
    sold

    mods please close thread!

  18. #18
    Oh man! What happen? I am interested with. I think I am too late to buy one. Do you have another?

  19. #19
    Quote Originally Posted by 07ROUSHSTG3 View Post
    sold

    mods please close thread!
    Thank you for posting! Your post will not be visible until a moderator has approved it for posting.

  20. #20
    Nice mustang. You have a good energy suspension poly transmission mount. I like that one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •