AR15 Complete Re-enforced Polymer Lower Assy

**Crawlin** · 03-07-2010, 06:32 PM

can you answer a question for me? is the O.D. diameter of a .223 barrel gonna be the same as the other variants like the 6.8 and the .458?

**Russ Jerome** · 03-07-2010, 07:43 PM

Depends on the make and manufacture, there are pencil 223 barrels under 3/4" and target 223 barrels over and inch thick.

Anybody see the 204 target AR on a vendors table? Had a huge built in muzzle break and porting, flared over 2" at the end, was $2600 and looked worth every penny all polished stainless and high end parts top to bottom.

**Russ Jerome** · 03-07-2010, 07:50 PM

Originally Posted by Lash

I can't count how many times I was asked while walking around if my lower was for sale.
.

I was putting two into my trunk and a guy asked "How much were those?" and I casualy said "Some new company is giving them out as demo's, you gotta be over 21yrs old." They looked all casual as if I was messing with them, by the time they hit the door they were in full stride. I kinda felt like being an ass after listening to the retard who visited our table,kinda mean thinking back now..

**Crawlin** · 03-07-2010, 08:14 PM

i'm looking at the RRA .458 upper assemblies. just trying to figure things out at this point, aha.

**Lash** · 03-07-2010, 09:02 PM

Originally Posted by Russ Jerome

Depends on the make and manufacture, there are pencil 223 barrels under 3/4" and target 223 barrels over and inch thick.

Anybody see the 204 target AR on a vendors table? Had a huge built in muzzle break and porting, flared over 2" at the end, was $2600 and looked worth every penny all polished stainless and high end parts top to bottom.

I don't know if I could ever justify spending $2600 on a .204...lol. If I were some kind of serious target sooter...maybe. The .204 is a crazy little round for varmiting.

**Lash** · 03-07-2010, 09:03 PM

Originally Posted by Russ Jerome

after listening to the retard who visited our table

Care to share?

I'm in the mood for a good story.

**Reverend Cooper** · 03-07-2010, 09:07 PM

its ok Russ I made sure I said goodby to the asshole to his face.

**Russ Jerome** · 03-07-2010, 09:35 PM

Originally Posted by Lash

Care to share?

I'm in the mood for a good story.

Some well meaning but un informed escaped mental patient from a local hospital saw several of us at a table LEGALY buying/selling firearms with our FFL licenced dealer at a LEGAL gun show and felt we were jeprodizing the 2nd amendment of others by LEGALY going about our buisness....he was nutz.

Im not sure if I was so shocked by his off base coment or the fact I was surounded by a lot of gun owners I kept from my usual responce of "Shut up dumbass" or "who the F are you?"....my only comment I recal was "cant fix stupid" to wich several of us agreed to and kept our mouths shut

**Crawlin** · 03-07-2010, 09:39 PM

all i saw was this....

from Coop

**Crawlin** · 03-07-2010, 09:39 PM

i laughed at the guy needing the electric cart to walk around 50ft pathways, hahaha.

**Bart H** · 03-07-2010, 10:48 PM

Originally Posted by Crawlin

that .450 stuff any good? looks like bushmaster has some .450 uppers for $500

Works great for taking down deer. I bought one that my son will be using next year. i dropped a spiker with it last season.

Thanks for the lower deal too guys!

**SSDude** · 03-08-2010, 04:53 AM

Originally Posted by Crawlin

i laughed at the guy needing the electric cart to walk around 50ft pathways, hahaha.

The guy with the electric cart is Bob Pucci the show organizer.

**Crawlin** · 03-08-2010, 06:44 AM

I know that, but he was giving Brian shit too because of the one whiner.

I wouldn't normally laugh at a guy on a cart(cause I know I'll be one in my later years)

It was simply because of the guy giving shit to us.

**Old Dog** · 03-08-2010, 07:05 AM

Thanks for the deal Brian & nice meeting you and Mike.

I'm looking at that .450 bushmaster upper also. Sounds like a beast of a cartridge. I see that Remington just added this round to their standard products.

**fivonut** · 03-08-2010, 07:21 AM

I put my S&W 5.56 upper on it yesterday and ran it through it's paces. The lower performed flawlessly, and fit great!! I even bump fired it emptying a 30 round magazine in a couple seconds with no problems. The composite hammer and trigger group concerned me at first, but not anymore!! Brian let me know when the second purchase comes around, I may take one or two more!!

**Reverend Cooper** · 03-08-2010, 12:02 PM

i will take 10 0r 20 more

**Crawlin** · 03-08-2010, 12:20 PM

Originally Posted by Reverend Cooper

i will take 10 0r 20 more

to sell yourself, hahahaha

UH OH, ordered one of my uppers

couple weeks since it's been a hot seller

**Bart H** · 03-08-2010, 01:35 PM

Originally Posted by Old Dog

Thanks for the deal Brian & nice meeting you and Mike.

I'm looking at that .450 bushmaster upper also. Sounds like a beast of a cartridge. I see that Remington just added this round to their standard products.

Remington owns Bushmaster and DPMS now, that is why they are doing a .450 bushmaster round. I have also turned some standard 30 rnd ar mags into 10 rnd .450 mags.

**SSDude** · 03-08-2010, 10:11 PM

Originally Posted by Crawlin

I know that, but he was giving Brian shit too because of the one whiner.

I wouldn't normally laugh at a guy on a cart(cause I know I'll be one in my later years)

It was simply because of the guy giving shit to us.

I guess I left to early and missed out on this display of intelligence.
What the hell was the beef?

**Crawlin** · 03-08-2010, 10:25 PM

Originally Posted by Bart H

Remington owns Bushmaster and DPMS now, that is why they are doing a .450 bushmaster round. I have also turned some standard 30 rnd ar mags into 10 rnd .450 mags.

what's needed for that? any feeding issues? i've been told to look for the sig 556mags as they seem to work as well

Thread: AR15 Complete Re-enforced Polymer Lower Assy

Thread Tools

Display

Posting Permissions