AR15 Complete Re-enforced Polymer Lower Assy

**Crawlin** · 03-06-2010, 07:23 AM

well if you really want to test that lower... haha you know what to do

haha

possible one time trouble ?

**Reverend Cooper** · 03-06-2010, 07:47 AM

lowers work great,the mag for the shotgun upper wont feed without jamming rounds and damaging them. the low buck lower worked great on the other uppers my brother had of his own.

**Coops Brother** · 03-06-2010, 08:30 AM

Originally Posted by Crawlin

Coop, the shotgun upper was a POS?

that sucks, I was really hoping it was gonna workout!

In a nutshell, it sucked. It would sometimes feed the second shell, but most of the time the bolt would slam into the shell hull and just about bend it in half. The recoil wasn't anything spectacular, FYI.

I guess I didn't even think about the fact that the shells have rim, and the rims won't stck on top of the lower one, they are always froward of the bottom shell, makes for fu<ked up feeding issues.

The lower functioned as expected, I ran 20 rds. .223 through my upper, no problems! The fit between the DPMS upper and the Plumcrazy lower was tight, I like tight!

Going for breakfast now, and then heading to the Expo Center, be there 10am or so.

Out.

**Crawlin** · 03-06-2010, 09:49 AM

I knew the lower would be fine, just sucks that the upper is the issue. Just was hoping maybe it was a bad upper, not a whole bad design. Oh well, time to figure out what's next.

Do the .50 Coop! haha

**Lash** · 03-06-2010, 11:11 AM

I vote 6.8 or 6.5

**Reverend Cooper** · 03-06-2010, 01:05 PM

we will see alot of options out there.50 does look good tho.we are here now at the gunshow its been pretty busy

**Crawlin** · 03-06-2010, 01:33 PM

I can't wait to leave work, haha.

**pOrk** · 03-06-2010, 06:06 PM

Show seemed like a bust, I didn't run across any deals besides the lower I picked up. Thanks Brian and Mike

**SSDude** · 03-06-2010, 06:20 PM

Brian, Mike, thanks for the hook up on the parts.

**Crawlin** · 03-06-2010, 06:33 PM

that .450 stuff any good? looks like bushmaster has some .450 uppers for $500

**fivonut** · 03-06-2010, 07:09 PM

Originally Posted by Reverend Cooper

we will see alot of options out there.50 does look good tho.we are here now at the gunshow its been pretty busy

Thanks Brian for giving up yours!! I'm very impressed with the quality of these. I threw my S&W upper on it quick to see how it felt. Was tight and very nice!! I might have to pick up a second one next round and find a Beowulf upper for it!!

**That_Guy** · 03-06-2010, 09:21 PM

Originally Posted by Reverend Cooper

lowers work great,the mag for the shotgun upper wont feed without jamming rounds and damaging them. the low buck lower worked great on the other uppers my brother had of his own.

could you shoot 45 long colt out of that?

**Lash** · 03-06-2010, 10:48 PM

I can't count how many times I was asked while walking around if my lower was for sale.
People would almost shit their pants when they found out how much I got it for.
Thanks again for the awesome deal.

I saw a few good deals at those show. Most stuff was average priced.
Some of those guys are on drugs with those ammo prices....lol.

**chargedformula** · 03-06-2010, 11:07 PM

same here! i couldn't believe how many people were asking what i had for sale! it was almost a little annoying. now i just gotta save some money for an upper. i have been looking into the del-ton ones. the delton DT1009 w/chrome lined barrel doesn't seem too bad. what kind of price could you get on that? group buy on uppers maybe?

**Coops Brother** · 03-07-2010, 09:39 AM

Thanks to all of ya that bought them, I am was also astounded at the people wanting to buy them. Guess they will just have to become a member of the coolest Muscle Car site in WI to get the inside track on the deals!!

Thanks again.

Brian

**pOrk** · 03-07-2010, 12:17 PM

Originally Posted by chargedformula

group buy on uppers maybe?

**Crawlin** · 03-07-2010, 12:51 PM

brian, what "other" caliber uppers can you get?

i see RRA has some .458 SOCOM and 6.8SPC upper halves available

**Silver350** · 03-07-2010, 01:05 PM

Originally Posted by pOrk

Show seemed like a bust, I didn't run across any deals besides the lower I picked up. Thanks Brian and Mike

I notice that a lot too. A lot of stuff is priced high, and seems like people just want a place to hang out and show off their aresonal rather then sell any of it.

**Crawlin** · 03-07-2010, 01:26 PM

yep yep yep. we were looking at some ar uppers that were like double what brian had posted up for pricing.

**Reverend Cooper** · 03-07-2010, 02:49 PM

there were a few items there that were at a decent price,but deals were hard to come by. The lowers are a hit and i will tell ya i will be getting more. im thinking a 50 upper is what i may try next.
It was great to meet you guys that i have not met yet and great to spend time with the guys i know. it was a blast!!!!

Thread: AR15 Complete Re-enforced Polymer Lower Assy

Thread Tools

Display

Thanks

Posting Permissions