buddy of mine is talking me into taking off the abs on my 1995 camaro so it looks nicer under the hood. is it a pain to due and will i have a light on in the dash. give me heads up would be great.
buddy of mine is talking me into taking off the abs on my 1995 camaro so it looks nicer under the hood. is it a pain to due and will i have a light on in the dash. give me heads up would be great.
z28 man
1979 camaro z28 4speed t-tops with well built 355 not dynoed yet goes pretty good
1994 camaro z28 auto lt1 350 with gm lt4 hot cam also not dynoed yet just got together
Yes and Yes. I would look into delete blocks like they make for LSX F-cars, and it will aslo need to incorporate the proprtioning valve too. The light on the dash is an easy fix, remove cluster and get rid of the bulb, or place black electrical tape neatly over the abs light on the cluster its self... Under neath the plastic window of course!
2012 Cruze ECO M6 - Crystal Red- Just a little more boost than stock!
2001 Camaro SS - Rallye Red - In process.
do you know if the f body cars are 2 wheel or four wheel abs if it is just two the rears should have a proprtioning valve in there aready right or no?
z28 man
1979 camaro z28 4speed t-tops with well built 355 not dynoed yet goes pretty good
1994 camaro z28 auto lt1 350 with gm lt4 hot cam also not dynoed yet just got together
does anyone have this done to there car if so could i see pic?
z28 man
1979 camaro z28 4speed t-tops with well built 355 not dynoed yet goes pretty good
1994 camaro z28 auto lt1 350 with gm lt4 hot cam also not dynoed yet just got together
All 4th gens were 4WAL. 97 and older had the shitty delco unit and 98+ got the Bosch unit which looked a little better.
This is the one for the LSX cars... no idea about LTX stuff. http://www.madmanandcoracing.com/sho...aspx?itemid=69
Last edited by BAD LS1; 11-18-2009 at 01:42 PM.
2012 Cruze ECO M6 - Crystal Red- Just a little more boost than stock!
2001 Camaro SS - Rallye Red - In process.
http://www.ls1tech.com/forums/lt1-lt...bs-delete.html
SJM manufacturing sell the ABS delete kit. its a proportioning valve and comes with pre-bent lines.
http://www.sjmmanufacturing.com/cam_brk_lt1.html
~Joe~UNITED SATES NAVY
LT4 Hotcam, LT headers, Magnaflow Catback, CAI, 58mm TB, FLT Trans, 2800 Stall, UMI suspension