Whats a decent build up youve had in mind or seen of a turbo 408w or any other size 351w based motor, something that makes 7-900 whp.
Results 1 to 5 of 5
Thread: Turbo 408w?
-
09-27-2009, 01:37 PM #1typical turbo ranger
- Join Date
- Dec 2007
- Location
- waukesha
- Posts
- 2,313
Turbo 408w?
99-ranger
88-ranger
89-spirit
-
10-01-2009, 02:14 PM #2Pumpgas Streetcar
- Join Date
- Feb 2005
- Posts
- 2,033
Don't do it!!!
My car has a 400ci windsor in it with an 88mm and it is making good power.
Motor:
9.5" Dart Block
4.130" Bore
3.75" Stroke 4340 Eagle Crank
6.200" 4340 Eagle H-Beam Rods
Ross Custom Pistons 8.5:1 Compression
Brodix Track 1X 225 Heads Ported-(Get yourself a set of TFS High Ports or R's)
Custom Solid Roller Cam By Steve Petty
Super Victor Intake
Turbo:
Custom 88mm by Supernatural Turbo
700-900whp is kind of a wide range, but honestly is very achieveable with a much simpler non-intercooled blower setup like a Vortech YSi. Adamsy87 on here is makeing well north of 600whp with a pump gas tuneup on a 418w, stock block, Victor Jr. heads, Hydraulic roller cam, and a vortech YSi.Last edited by FourEyedFord; 10-01-2009 at 03:42 PM.
-
10-04-2009, 03:37 PM #3typical turbo ranger
- Join Date
- Dec 2007
- Location
- waukesha
- Posts
- 2,313
hmmmmmm
Last edited by HY35F2T; 10-05-2009 at 11:11 AM.
99-ranger
88-ranger
89-spirit
-
10-04-2009, 04:57 PM #4Brew City Muscle Original!!!
- Join Date
- Sep 2002
- Location
- Sun Prairie, Wi
- Posts
- 687
I would recommend a dart block if you want 800 or 900 RWHP
In Progress
604BBF/TH400/Radials
-
10-05-2009, 04:51 PM #5SET ON SAFE!
- Join Date
- Jul 2008
- Location
- Plymouth WI
- Posts
- 1,477
Windsor block max is around 650HP...At least from people that run stock blockers that I hear about on Corral.
If a hammer,crescent wrench,duct tape, or JB Weld can't fix it........Its gotta be a electrical problem
Reply With Quote