Results 1 to 5 of 5
  1. #1
    BCM Cruiser
    Join Date
    Nov 2005
    Location
    the grove
    Posts
    165

    am I not meant to ride this bike?

    I bought this pos last year, and it wasn't running right. noticed the carbs were leaking, so I replaced all the gaskets in it. still wasn't russing right so I checked the jets and half of them were plugged. I ended up waiting around for the kit to show up. I replaced a the exhaust because it was not the correct setup (put together by a hack). I start it this summer after I put the OE exhaust on and it still won't Idle down. I take the carbs out again and the slow jets are plugged. I just got them back in and the carbs are leaking again.

  2. #2
    Post whore BoosTT's Avatar
    Join Date
    Dec 2007
    Location
    Mukwonago
    Posts
    1,484
    Model?

  3. #3
    BCM Cruiser
    Join Date
    Nov 2005
    Location
    the grove
    Posts
    165
    it's an 83 v45 magna

  4. #4
    check the gaskets maybe you pinched one putting them back together? or the dissasembly a few times wore them out and you need a new set again
    2001 Trans Am WS6, Race car
    [COLOR="Blue"]2006 Tacoma Xrunner

  5. #5
    BCM Cruiser
    Join Date
    Nov 2005
    Location
    the grove
    Posts
    165
    yeah I already ordered the gasket set. I think this is more like a rant. I know for sure I didn't pinch any. I always lube the orings and check the bowl gaskets before I put it together. It most likely was from taking them apart so many times

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •