Need driveshaft work

[torque.hit]

Hey guys,

I tried searching without much luck. Anyone know of a good shop that can shorten and balance my driveshaft?

I measure from the face of the tailshaft/seal to the face of the rear end yoke and came out with 54." In its present shape, the driveshaft only has about 1/4" travel before the yoke bottoms out. I believe it only needs to be shortened by ~3/8" and rebalanced.

[Sleeper Sierra]

a 1 in the ghetto in milwaukee here is the info.
3453 N 35th St
Milwaukee, WI,
53216-3787
Phone: 414-445-9996
last time i had them shorten a shaft for me it was about 150.