ATV Pictures thread

**civic600** · 11-24-2008, 05:32 PM

where does everyone ride? i just bought an 05 ltz 400 and my buddy has an 06 400 ex. we are looking for more ppl to go ride with and some places to go

**wrath** · 11-24-2008, 08:37 PM

I have a 91 Yamaha Blaster I haven't ridden in 3 or 4 years. I used to race it when I was in Highschool and a lot skinnier.

I think in this picture it had a bored 2mm over cylinder, ported and polished... a milled and swirled head, a DG pipe and silencer, a 28mm PWK carb, UNI filter, no lid, et cetera. Looks like I had the stock seat, stock shocks, swingarm, and bars back on it and my practice tires. The nerfs/bumper/grab bar are MMF/AC racing. Those people probably aren't even in business anymore. haha. It's probably November or December looking picture so I probably had converted it over to winter riding going by the handguards.

Looks like Fall of 1999 going by the fact that I'm working on my old S15 (yes, you counted right, there's 3 boats in the pictures):

**GTSLOW** · 11-24-2008, 09:25 PM

Sweet lookin rides!

**pashtrd** · 11-26-2008, 06:23 PM

my 88 Yamaha Moto 4

**DynoTom** · 11-26-2008, 11:38 PM

Originally Posted by civic600

where does everyone ride? i just bought an 05 ltz 400 and my buddy has an 06 400 ex. we are looking for more ppl to go ride with and some places to go

You are more than welcome to ride with us !

**civic600** · 11-27-2008, 09:06 AM

awesome. my buddies neighbor has a descent little track that we rip around on but we wanna go somewhere else. pm me your info so i can get ahold of you. we would definately come out!

**DynoTom** · 11-27-2008, 12:36 PM

Originally Posted by civic600

awesome. my buddies neighbor has a descent little track that we rip around on but we wanna go somewhere else. pm me your info so i can get ahold of you. we would definately come out!

BOSS LX & 4I NOTCH are both my nephews and those are the main guys I ride with now....We are ALWAYS looking for more guys to go with though!

There is some place called "Prochs" ( sp??? ) that is supposed to be a good place to ride atv's ? I heard it's behind Andrew Chevrolet in Cedarburg IIRC ?

I have never been there but, if it's a place to ride atv's that close to my home I want to check it out !

I'm also switching over all my atv's to ice tires to try them out on the lakes this winter !

As soon as I get some riding places and dates set up I will let you know !

**SmokinRAM114** · 11-27-2008, 01:14 PM

my bros junk. 2001 walsh race craft hybrid. it is built from the ground up has a yz 426 bike motor in it. ITS FAST! custom axis 21in shocks. also have a 1986 TRX250r

**civic600** · 11-28-2008, 12:05 PM

Originally Posted by DynoTom

BOSS LX & 4I NOTCH are both my nephews and those are the main guys I ride with now....We are ALWAYS looking for more guys to go with though!

There is some place called "Prochs" ( sp??? ) that is supposed to be a good place to ride atv's ? I heard it's behind Andrew Chevrolet in Cedarburg IIRC ?

I have never been there but, if it's a place to ride atv's that close to my home I want to check it out !

I'm also switching over all my atv's to ice tires to try them out on the lakes this winter !

As soon as I get some riding places and dates set up I will let you know !

definately sounds good to me. just let me know and we are there!

**70 cutlass 442** · 11-28-2008, 01:41 PM

Heres the predator

and a couple of the banshee

**DynoTom** · 05-03-2009, 11:06 PM

BOSS BANSHEE

**badass88gt** · 05-03-2009, 11:20 PM

I dont know which 'Shee I like better. That black is MEAN.

**stenchmiester** · 05-04-2009, 07:59 AM

**BOSS LX** · 05-04-2009, 04:19 PM

Originally Posted by DynoTom

BOSS BANSHEE

I forgot what it looks like when not covered with a inch of sanding dust!

I cannot wait for you to start working on it. With out you finishing it up, it probably wouldn't be done until August!

**DynoTom** · 05-04-2009, 07:08 PM

Originally Posted by BOSS LX

I forgot what it looks like when not covered with a inch of sanding dust!

I cannot wait for you to start working on it. With out you finishing it up, it probably wouldn't be done until August!

I will get that fugger running for ya ! All I need is my volt / ohm meter and the wiring diagram to show me what power is suppost to be when and where and start taking readings.....I start at the stator and work my way up.....

**BOSS LX** · 05-04-2009, 07:16 PM

Originally Posted by DynoTom

I will get that fugger running for ya ! All I need is my volt / ohm meter and the wiring diagram to show me what power is suppost to be when and where and start taking readings.....I start at the stator and work my way up.....

How about I finish the banshee, and you finish the 86!

**Graystone** · 05-16-2009, 07:34 PM

Thought I would update the pic of my quad since I was getting it ready for the weekend. The only thing not on is is my AC Blackline nerfs. I am waiting for those to get in. I should have them by Friday so i can put them on before we leave.

**Graystone** · 05-16-2009, 07:35 PM

Oops forgot the pic.

**badass88gt** · 08-12-2009, 04:46 PM

Bad. M'er. F'er.

This thing is an animal compared to my LT250R. I'ma gonna get all kinds of hurt.

**MY FYN 79** · 08-14-2009, 05:27 PM

Nice Gade, I just picked one up myself.

I changed quite a bit of stuff to "make it mine", but it sure is a fun machine now. I totally re-did the snorkels, raised all the vent lines, did the frame mod, did some clutch work, different tires, and last thing to do will be some dyno tuning.

Here it is in the mud pit.

Also a video of me getting schooled by another Gade in the pit!

http://www.youtube.com/watch?v=eAzbp3VYGiY

Thread: ATV Pictures thread

Thread Tools

Rate This Thread

Display

ridin

Boss lx - 4i notch and dynotom

Boss banshee

Volt meter

Posting Permissions