Results 1 to 9 of 9
  1. 10-20-2008, 11:33 PM #1
    00SoSlow
    00SoSlow is offline
    BCM Cruiser 00SoSlow's Avatar
    Join Date
    Jun 2006
    Location
    Doesn't Matter
    Posts
    220

    Heater core replacement help!!!!

    Ok i have my whole dash apart and see the 3 dif sections... is it one big peice or am i just not lookin in the right spot to seperate them and pull just the one out that i need? let me know i need to get this in ASAP

    any help would be awesome
    Reply With Quote Reply With Quote
  2. 10-20-2008, 11:47 PM #2
    00SoSlow
    00SoSlow is offline
    BCM Cruiser 00SoSlow's Avatar
    Join Date
    Jun 2006
    Location
    Doesn't Matter
    Posts
    220
    87 fox body
    Reply With Quote Reply With Quote
  3. 10-21-2008, 09:07 AM #3
    DurtyKurty
    DurtyKurty is offline
    I am Kurt. DurtyKurty's Avatar
    Join Date
    Oct 2005
    Location
    Wauwatosa
    Posts
    898
    Just going off memory here....

    You pull the whole dash out which is seperate from the heater/ac duct work. then you have pull the whole heater/ac duct work assembly out, and open it up and that is where you find the heater core.
    Reply With Quote Reply With Quote
  4. 10-21-2008, 01:58 PM #4
    FourEyedFord
    FourEyedFord is offline
    Pumpgas Streetcar FourEyedFord's Avatar
    Join Date
    Feb 2005
    Posts
    2,033
    DurtyKurty is my hero.......
    Reply With Quote Reply With Quote
  5. 10-21-2008, 04:16 PM #5
    00SoSlow
    00SoSlow is offline
    BCM Cruiser 00SoSlow's Avatar
    Join Date
    Jun 2006
    Location
    Doesn't Matter
    Posts
    220
    I got the heater core out... and reassembled the dash, now i can't get the dif vent modes to work... floor, vent, defrost, mix it all just comes out the top defroster, doesn't switch.................. this is pissin me off
    Reply With Quote Reply With Quote
  6. 10-21-2008, 04:56 PM #6
    DurtyKurty
    DurtyKurty is offline
    I am Kurt. DurtyKurty's Avatar
    Join Date
    Oct 2005
    Location
    Wauwatosa
    Posts
    898
    sounds like the vacuum line to the controls is pinched or not connected.
    Reply With Quote Reply With Quote
  7. 10-21-2008, 04:58 PM #7
    00SoSlow
    00SoSlow is offline
    BCM Cruiser 00SoSlow's Avatar
    Join Date
    Jun 2006
    Location
    Doesn't Matter
    Posts
    220
    the vacuum lines were working until i plugged the blower clip back on... then it doesn't work now??? hmm
    Reply With Quote Reply With Quote
  8. 10-22-2008, 12:43 AM #8
    00SoSlow
    00SoSlow is offline
    BCM Cruiser 00SoSlow's Avatar
    Join Date
    Jun 2006
    Location
    Doesn't Matter
    Posts
    220
    Everything is back to normal and now i have no headlights.... where should i look to see if there is something not connected? or wtf did i do??? the running lights work but the headlights don't!!! wtf im so pissed off its been one god dam problem after another
    Reply With Quote Reply With Quote
  9. 10-23-2008, 03:04 AM #9
    00SoSlow
    00SoSlow is offline
    BCM Cruiser 00SoSlow's Avatar
    Join Date
    Jun 2006
    Location
    Doesn't Matter
    Posts
    220
    everything works now there was a loose plug that i did not see... it was behind 2 plugs... thanks for the suggestion from everyone




    WOOT happy its all good
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules