Page 1 of 7 12345 ... LastLast
Results 1 to 20 of 175

Hybrid View

  1. #1
    just a dumb guy scottie K's Avatar
    Join Date
    Jul 2004
    Location
    MILWAUKEE
    Posts
    3,434

    Testing..waters..10.00 class????

    Im testing the waters.. for a possible 10.00 cap class... it will be a stocksusp. class.... based on a tight rules for street cars that can compete...

    expample.... full interiors ..no back seats ok..NO ALUM..dashes door panals..so forthall lights must must function.(ie) head lights turn signals and so forth...must have working charging system, stock suspention after market replacement ok...
    NO MINI TUBS!!!!....exterior BODY... limited to fiberglass hoods and bumpers... door glass must function up/down

    all cars must have mufflers and with exhuast to min rear axle to dump...
    ** car must be registered and lic***

    No tows to lanes or from shut down area..

    max tire for 15'' rim is 275 drg radial or 28.10.5
    16- DOT tire( drag raidals) or et street
    17 "" ""
    18 "" ""

    motor combos.... sb- super charged( a trim or s trim) or factory super charger
    sb- Nirtous limited to plate 2 soilnoids 1 fuel 1 nos
    EFI- nitrous limited to single nozzle
    BIG BLOCK- any CI over 496ci and above must run NA single carb
    Big block - any motor up to 495ci can run 1 plate system only
    limited to 1 fuel/ 1 nos with single carb

    conventional heads only on all combos....

    all nos combos limited to a single bottle with a #4 main line

    ENTRY WOULD BE 50.00 WINNER-400.00-600.00 AND IT WOULD PAY THROUGH 4TH PLACE BUTT COULD GO ALL THE WAY DOWN TO QAULIFIING

    THESE ARE ROUGH PAY OUTS TO START.... BUTT IM SURE IM CLOSE

    ***theses are some rough rules... but just some ideas that people had givn imput... if anyone is interested please post...and some ideas that you would have....



    Im posting to see if anyone would be interested??

    THANKS SCOTTYK
    Last edited by scottie K; 09-25-2008 at 06:21 PM.
    CKSC

  2. #2
    Sold the Goat! Fast SVT's Avatar
    Join Date
    Jun 2008
    Location
    Iraq
    Posts
    507
    I can't put my back seats in because of the cage.


    HD 103" Kit/SE 255 Cams/D&D 2-1 Fat Cat Exhaust/SE Heavy Breather/Arnott Aldan Air Ride/Front Lowering Springs/HD Reaper Wheels

  3. #3
    just a dumb guy scottie K's Avatar
    Join Date
    Jul 2004
    Location
    MILWAUKEE
    Posts
    3,434
    these are rough rules..... 99.99% there wont be back seats hahahaha
    CKSC

  4. #4
    Pissed off the admins and earned a time out.
    Join Date
    Feb 2008
    Posts
    833
    same here, also, what about turbo cars? I cant beleive Im saying this, but I would do it if we can run the turbo and leave the back seat out.......

  5. #5
    just a dumb guy scottie K's Avatar
    Join Date
    Jul 2004
    Location
    MILWAUKEE
    Posts
    3,434
    Quote Originally Posted by westybenddyno/forest View Post
    same here, also, what about turbo cars? I cant beleive Im saying this, but I would do it if we can run the turbo and leave the back seat out.......
    Turbos ?? single turbo with air to air intercolling... max ci 360ci with max small frame street turbo T60.???...
    CKSC

  6. #6
    just a dumb guy scottie K's Avatar
    Join Date
    Jul 2004
    Location
    MILWAUKEE
    Posts
    3,434
    all cars must have a min 6pt bar and fire jacket full face snell approved helmet and glove..... IF anyone goes faster than 11.49...
    CKSC

  7. #7
    Pissed off the admins and earned a time out.
    Join Date
    Feb 2008
    Posts
    833
    Quote Originally Posted by scottie K View Post
    IF anyone goes faster than 11.49...
    Im not worried about that.....

  8. #8
    just a dumb guy scottie K's Avatar
    Join Date
    Jul 2004
    Location
    MILWAUKEE
    Posts
    3,434
    Quote Originally Posted by scottie K View Post
    all cars must have a min 6pt bar and fire jacket full face snell approved helmet and glove..... IF anyone goes faster than 11.49...
    and abide by NHRA rule book
    CKSC

  9. #9
    I like the fact you are so involved with GLD lately Scotty, try and keep that place around!
    I think that is a cool class, although I don't have anything that goes that fast right now though...
    (P.S. a small block with an S trim is going to be huffing HARD to go 10.0)

  10. #10
    Ol' School 70 cutlass 442's Avatar
    Join Date
    Feb 2005
    Location
    westside
    Posts
    2,850
    Quote Originally Posted by scottie K View Post
    Turbos ?? single turbo with air to air intercolling... max ci 360ci with max small frame street turbo T60.???...
    t60 is way to small, id say cap it at a t76, t60 will run out of steam at 4500 rpm unless we all drive hondas
    70 cutlass 442- dads car
    95 stang- Stock long block 195,XXX miles
    03 XC600 - bone stock (still faster then smokin ram)
    03 Polaris predator- 4.250 bore (assembly required)
    84- 4 eyed

  11. #11
    RTCTTFMF juicedimpss's Avatar
    Join Date
    Jul 2004
    Location
    someone elses car
    Posts
    9,986
    Quote Originally Posted by scottie K View Post
    Turbos ?? single turbo with air to air intercolling... max ci 360ci with max small frame street turbo T60.???...
    a 76mm would fill the field up a bit imo.ive seen them around really cheap too.
    Check out our NEW online store!
    http://store.clocksoffracing.com/

  12. #12
    Pissed off the admins and earned a time out.
    Join Date
    Feb 2008
    Posts
    833
    can I spray it too? or water meth?

  13. #13
    just a dumb guy scottie K's Avatar
    Join Date
    Jul 2004
    Location
    MILWAUKEE
    Posts
    3,434
    Quote Originally Posted by westybenddyno/forest View Post
    can I spray it too? or water meth?
    nope!!! one power adder only
    CKSC

  14. #14
    Pissed off the admins and earned a time out.
    Join Date
    Feb 2008
    Posts
    833
    how about no intercooler and have water meth instead?

  15. #15
    just a dumb guy scottie K's Avatar
    Join Date
    Jul 2004
    Location
    MILWAUKEE
    Posts
    3,434
    meth is a power adder...
    CKSC

  16. #16
    Pissed off the admins and earned a time out.
    Join Date
    Feb 2008
    Posts
    833
    Quote Originally Posted by scottie K View Post
    meth is a power adder...
    correction methanol is an alternate fuel. nos is a power adder in the form of a gas or vapor. methanol is derived from a corn based fuel wich we can buy at the pump. water doesn't add power it only cools like an intercooler.

  17. #17
    Breecher_7
    Guest
    Quote Originally Posted by westybenddyno/forest View Post
    correction methanol is an alternate fuel. nos is a power adder in the form of a gas or vapor. methanol is derived from a corn based fuel wich we can buy at the pump. water doesn't add power it only cools like an intercooler.
    What do you care, you dont own anything with a turbo on it......

  18. #18
    RTCTTFMF juicedimpss's Avatar
    Join Date
    Jul 2004
    Location
    someone elses car
    Posts
    9,986
    Quote Originally Posted by westybenddyno/forest View Post
    correction methanol is an alternate fuel. nos is a power adder in the form of a gas or vapor. methanol is derived from a corn based fuel wich we can buy at the pump. water doesn't add power it only cools like an intercooler.
    and an intercooler does what? oh yeah,allows more boost/timing=power adder
    Check out our NEW online store!
    http://store.clocksoffracing.com/

  19. #19
    Breecher_7
    Guest
    Quote Originally Posted by juicedimpss View Post
    and an intercooler does what? oh yeah,allows more boost/timing=power adder
    So your telling me that the intercooler should be considered a power adder? I think turbo cars should be allowed either a intercooler OR Meth injection.

  20. #20
    I wanna go fast... $title Champion Crawlin's Avatar
    Join Date
    May 2002
    Location
    I have A.D.D.
    Posts
    13,269
    got to up the turbo size to a 76mm. TOO many people running around with those T76 street kits or TC76 on all kinds of vehicles. Mustangs, Camaro's, Supra's, Imports, etc... You'd be killing a WHOLE bunch of possible entries with something that small.

    I think that this class would be incredibly big and incredibly fun. ALOT cheaper than anything else going on right now since it won't require the big safety $$$ that faster than 9.99 represents.

    But you have to look at what a majority will be running. 351w fords with a simple overbore or an iron block LS1 would be over that 360 limit with the turbo's, and you'll kill alot of people.

    I still think limiting a TON of stuff and cid and and kits will really kill ALOT of people who would want to participate. It's still capped, and I don't think anyone will be bringing an 8.90 car to run 10.0's all day long. Although possible just like "True Street" does.

    By limiting certain things, like EFI w/ one nozzle... no one is going to want to take a stock intake setup vehicle like a fox body 5.0 or an LT1 or LS1 and run a cam only car and spray a 250 shot through it to try and be competitive enough to have alot of fun. It's gonna hurt things, in a time when you are building a class for the majority of just "normal" folks who don't have room for a $15,000 engine

    if you did this, i'd build a car for the class guaranteed

    also have to look into aftermarket efi systems. allowed or not allowed? good number of people with DFI on a crate engine from scoggin dickey or whatever that would want to do it too.

    if you REALLY want to have fun with it, keep it a 26x10 e.t. street or a 275/60 Drag Radial as the max tire sizes for a 15" wheel. I know it's two different heights, but I bet you'd see a SHIT TON of drag radial cars then. 50lb weight break for nitto's or BFG's, haha
    Last edited by Crawlin; 09-25-2008 at 06:54 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •