Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 45
  1. #21
    have pot, will stir WickedSix's Avatar
    Join Date
    Jun 2007
    Location
    the far west side
    Posts
    3,061
    Where is a pic with the t-tops off and your mullet flowing in the breeze kev? u ever get some sticky tires for that thing??
    -Patrick


    I r teh have da kewl now cuz of that ^^^^^^

    "It's not a racecar if it drives to the track and goes home on a flatbed apparently"

  2. #22
    She's Back in Action Cutlass Queen's Avatar
    Join Date
    Sep 2006
    Location
    Milwaukee
    Posts
    2,793
    Quote Originally Posted by PonyKiller87 View Post
    Wait till you see it this year, rims are getting blacked out, tail lightes getting smoked, windows tinted... If it makes you feel any better that pic was taken right after I put the engine back together, before I turned the key, it hasnt been that clean since then, lol.

    The headlights are either the normal or silverstars, cant remember. Fogs are the diamond blue but there not on the car anymore, they block to much of the ram air
    If your iroc comes up missing some things off it, it wasn't me
    "Just Deal With It" Racing

  3. #23
    Looking for Fozy parts Want_Notch's Avatar
    Join Date
    Jul 2004
    Location
    Alone in the Dark
    Posts
    1,751
    I want a third gen.......but just don't have room for one.
    2001 Subaru Forester

  4. #24
    Post whore PonyKiller87's Avatar
    Join Date
    Jan 2003
    Location
    Cedarburg, WI
    Posts
    1,960
    Quote Originally Posted by WickedSix View Post
    Where is a pic with the t-tops off and your mullet flowing in the breeze kev? u ever get some sticky tires for that thing??
    Always gotta throw the mullet jokes at the third gens, I see how it is.


    Don't have the tires yet, should have them by summer though.
    Kevin
    Daily Driver: 1999 Chevy Tahoe w/ Vortec 350
    Wifes DD: 2003 VW Passat Wagon w/ 1.8T, 5 speed auto
    Plow Truck: 99 Chevy K3500 Pickup w/ a Vortec 454
    Toy 1: 98 BMW R1100R
    87 Camaro Iroc Z28, SOLD, Gone But not Forgotten

  5. #25
    Rather be junkyarding PB86MCSS's Avatar
    Join Date
    Aug 2002
    Location
    New Berlin
    Posts
    3,431
    Quote Originally Posted by PonyKiller87 View Post
    Ill post some up pics when I get home.


    FYI for the 3rd gen guys - I will be building wiring harnesses this summer that will let you run a TPI(or any other port injected SBC) with the 411 LS1 computer. It will make your car OBDII, sequential port injection, all kinds of other benefits to this swap, but the biggest one will be tuning, almost nobody out there does Dyno tuning for PROM based stuff and even if they do its really hit or miss. With this harness the car will be tuned just like an LS1 4th gen.

    I'd be interested to learn more about this....hoping to do some TPI tuning this summer to mine, sorry no 3rd gen pics or car here to share though . I'm assuming you will run the first of this harness on your car? I am curious to see how it goes.

    For the 3rd genners: http://jalopnik.com/360720/camaro-du...d-water-heater

    , a waste of a clean Camaro shell....but interesting anyway.
    86' MCSS - 13.35 @103
    87' MCLS - 14.55 @96
    02' Regal GS - Who cares

  6. #26
    Quote Originally Posted by PB86MCSS View Post
    I'd be interested to learn more about this....hoping to do some TPI tuning this summer to mine, sorry no 3rd gen pics or car here to share though . I'm assuming you will run the first of this harness on your car? I am curious to see how it goes.

    For the 3rd genners: http://jalopnik.com/360720/camaro-du...d-water-heater

    , a waste of a clean Camaro shell....but interesting anyway.
    That's a 82 best thing is the factory fiber glass hood with ram air on it
    http://www.brewcitymuscle.com/forum/signaturepics/sigpic372_2.gif

  7. #27



    Deanna, when do you want to line up the to the Iroc to me?? Noooo, i'm not gonna even try the cutty!!
    Last edited by 67-400; 02-26-2008 at 10:07 PM.

  8. #28
    Hey BadAzzGTA89, Nice lookin bird! Didn't I sell you those SLP Runners I used to have? Did you ever make good use of em?

  9. #29
    have pot, will stir WickedSix's Avatar
    Join Date
    Jun 2007
    Location
    the far west side
    Posts
    3,061
    Quote Originally Posted by 25thannivZ28 View Post



    I still haven't figured out how to attach pics without having to click the link, sorry guys/gals. Deanna, when do you want to line up the to the Iroc to me?? Noooo, i'm not gonna even try the cutty!!
    she's a beaut
    -Patrick


    I r teh have da kewl now cuz of that ^^^^^^

    "It's not a racecar if it drives to the track and goes home on a flatbed apparently"

  10. #30
    She's Back in Action Cutlass Queen's Avatar
    Join Date
    Sep 2006
    Location
    Milwaukee
    Posts
    2,793
    Quote Originally Posted by 25thannivZ28 View Post
    Attachment 5123
    Attachment 5124

    I still haven't figured out how to attach pics without having to click the link, sorry guys/gals. Deanna, when do you want to line up the to the Iroc to me?? Noooo, i'm not gonna even try the cutty!!
    Awww Mikey cmon.....the cutty is gonna be out this year too and I'll give ya some land

    The iroc needs some tlc before I race ya this year, it's been sitting for a while now. Hell the plugs and wires are 10 years old I believe...not even kidding either. First thing on my "to do" list for that is the tune up, even though I'm sure it'll get romped by ur purple beast
    "Just Deal With It" Racing

  11. #31
    Brandon W.
    Guest
    the 08 season drag car...turbo 3rd gen FTW!!


  12. #32
    Quote Originally Posted by 25thannivZ28 View Post
    Hey BadAzzGTA89, Nice lookin bird! Didn't I sell you those SLP Runners I used to have? Did you ever make good use of em?
    Why thank you sir and yes i did i worked them out a little and installed them they should work good with the forced induction
    http://www.brewcitymuscle.com/forum/signaturepics/sigpic372_2.gif

  13. #33
    Quote Originally Posted by PonyKiller87 View Post






    These are all pretty old, but it still looks pretty much the same.
    that is clean!


    Play PS3 with ME!
    Hooray for tuning!

  14. #34
    Collecting parts! Waver's Avatar
    Join Date
    Nov 2005
    Location
    Over here
    Posts
    7,375
    Quote Originally Posted by PonyKiller87 View Post






    These are all pretty old, but it still looks pretty much the same.
    Dude leave those rims alone...I have always liked the chrome/gold look on black third gens.....only other varient I like are the body color accented rims
    Quote Originally Posted by HITMAN View Post
    stew - continuing confirmation of the hypothesis that marbles aren't sharp.
    Quote Originally Posted by Cryptic View Post
    Jim you build... break... and rebuild cars faster than I can put one together.

  15. #35
    RTCTTFMF juicedimpss's Avatar
    Join Date
    Jul 2004
    Location
    someone elses car
    Posts
    9,986
    Quote Originally Posted by PonyKiller87 View Post
    Ill post some up pics when I get home.


    FYI for the 3rd gen guys - I will be building wiring harnesses this summer that will let you run a TPI(or any other port injected SBC) with the 411 LS1 computer. It will make your car OBDII, sequential port injection, all kinds of other benefits to this swap, but the biggest one will be tuning, almost nobody out there does Dyno tuning for PROM based stuff and even if they do its really hit or miss. With this harness the car will be tuned just like an LS1 4th gen.
    that would make a great swap for those guys.
    how much do you think those harnesses will end up costing?
    Check out our NEW online store!
    http://store.clocksoffracing.com/

  16. #36
    Post whore PonyKiller87's Avatar
    Join Date
    Jan 2003
    Location
    Cedarburg, WI
    Posts
    1,960
    Quote Originally Posted by Neuwave View Post
    Dude leave those rims alone...I have always liked the chrome/gold look on black third gens.....only other varient I like are the body color accented rims
    I like them the way they are but the clear is pealing now in a bunch of spots. I was going to polish them but decided black and gold would look pretty slick, probably polish the lip though, not sure yet.
    Kevin
    Daily Driver: 1999 Chevy Tahoe w/ Vortec 350
    Wifes DD: 2003 VW Passat Wagon w/ 1.8T, 5 speed auto
    Plow Truck: 99 Chevy K3500 Pickup w/ a Vortec 454
    Toy 1: 98 BMW R1100R
    87 Camaro Iroc Z28, SOLD, Gone But not Forgotten

  17. #37
    Post whore PonyKiller87's Avatar
    Join Date
    Jan 2003
    Location
    Cedarburg, WI
    Posts
    1,960
    Quote Originally Posted by juicedimpss View Post
    that would make a great swap for those guys.
    how much do you think those harnesses will end up costing?
    Well its a little more than just a harness. This is basicaly a hybrid setup that uses alot of the parts from the vortec 350 in trucks/vans from 96-00. In 01 the chevy express van with the vortec 350 had the 411 computer so thats the cal file you start with, and because that van was offered in a 1 ton, you can set it up to run either the 4L60e or the 4L80e (but not both, have to pic one)

    Cheep way to do it:
    Find a 01 chevy express van in the junk yard and take the following parts:
    -Complete wiring harness
    -Distributor(or cam sensor, its alot like the opti spark but not as problematic)
    -Timing cover (its plastic be careful it doesnt break)
    -Reluctor wheel (its under the timing cover infront of the crank gear)
    -Harmonic balancer (you can use the one you have if you machine down the snout the thicknes of the reluctor wheel)

    My way to do it:
    -Build a new harness that has only the stuff I need in it
    -Accel Billet Distributor (only after market vortec distributor, after you break a few stockers you realize why I want this one)
    -Comp Aluminum Timing cover, modified with a threaded hole for the crank sensor.
    -Stock reluctor wheel
    -ATI blancer cut down to the correct length.

    I suppose I should just start a new thread about this so it doesn't crap this one up but at the same time, this is probably only of interest to people in here. As far as Cost I have no idea, There is a guy selling this already and I think hes getting about $200-$400 depending on what you all need.
    Kevin
    Daily Driver: 1999 Chevy Tahoe w/ Vortec 350
    Wifes DD: 2003 VW Passat Wagon w/ 1.8T, 5 speed auto
    Plow Truck: 99 Chevy K3500 Pickup w/ a Vortec 454
    Toy 1: 98 BMW R1100R
    87 Camaro Iroc Z28, SOLD, Gone But not Forgotten

  18. #38
    OHHHHH Josepy's Avatar
    Join Date
    Mar 2006
    Location
    Meow
    Posts
    4,109
    <div class="imlinks"> <div class="popupmenu vehicleaction"> <a class="popupctrl" href="#"><strong>Vehicles</strong></a> <ul class="popupbody popuphover vehicleaction_body"> <li class="left"><a href="http://www.brewcitymuscle.com/forum/garage_ve
    Quote Originally Posted by BadAzzGTA89 View Post
    All i have at work here.



    god i love your GTA
    2002 Trans AM Ws6 M6 Black on Black. Procharged
    2011 GMC Sierra All Terrain
    2009 Infiniti G37x

  19. #39
    Obsessed loud91rs's Avatar
    Join Date
    Apr 2004
    Location
    West Allis, WI
    Posts
    1,382
    Here are mine:
    Just after I got it from Indiana, haven't done anything to it yet it kind of turned into a DD because the 305 gets better gas than my hemi.


    Pics of my 85 when I bought it, it is now at the bodyshop for a few minor things I'll post pics when I get it back.

    12 Suzuki Hayabusa Turbo
    12 Suzuki Hayabusa LE
    04 Pontiac GTO
    72 Pontiac GTO

  20. #40
    Senior Member..now yer posting! Kory 88Iroc lt1's Avatar
    Join Date
    May 2002
    Posts
    423
    I can see that I need to get some pics of mine up.
    I will have a set of nittos on iroc rims for sale soon if anyone is looking.
    Kevin the computer thing sounds interesting.
    Kory
    88 Iroc 94 lt1 Ai dominator heads,cam ported intake, 1.6 promag rrs,homebuilt equal length long tube headers, hooker catback, cutout, csi wp,t56, hurst shifter,street twin, ls1 brakes all around. homebuilt 8.8 rear with 4:10 fms gears. 12.74@111 350 rwhp/360rwtq New times and dyno numbers to come.

    I build custom subframe connectors/headers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •