ANY thirdgens here?

[HY35F2T]

i know theres a few you should post up your car im thinking about getting back into them.damn no mullet icon lol.

[Karps TA]

I've got one, but it's kinda a POS. No lambo doors or train horns, so it's probably not real interesting. And I mostly built it myself so there's no shop to rip on lol

[HY35F2T]

I've got one, but it's kinda a POS. No lambo doors or train horns, so it's probably not real interesting. And I mostly built it myself so there's no shop to rip on lol

pics son

[BadAzzGTA89]

All i have at work here.

[PonyKiller87]

Ill post some up pics when I get home.


FYI for the 3rd gen guys - I will be building wiring harnesses this summer that will let you run a TPI(or any other port injected SBC) with the 411 LS1 computer. It will make your car OBDII, sequential port injection, all kinds of other benefits to this swap, but the biggest one will be tuning, almost nobody out there does Dyno tuning for PROM based stuff and even if they do its really hit or miss. With this harness the car will be tuned just like an LS1 4th gen.

[Sexy83TA]

[PB86MCSS]

Ill post some up pics when I get home.


FYI for the 3rd gen guys - I will be building wiring harnesses this summer that will let you run a TPI(or any other port injected SBC) with the 411 LS1 computer. It will make your car OBDII, sequential port injection, all kinds of other benefits to this swap, but the biggest one will be tuning, almost nobody out there does Dyno tuning for PROM based stuff and even if they do its really hit or miss. With this harness the car will be tuned just like an LS1 4th gen.

I'd be interested to learn more about this....hoping to do some TPI tuning this summer to mine, sorry no 3rd gen pics or car here to share though . I'm assuming you will run the first of this harness on your car? I am curious to see how it goes.

For the 3rd genners: http://jalopnik.com/360720/camaro-du...d-water-heater

, a waste of a clean Camaro shell....but interesting anyway.

[juicedimpss]

Ill post some up pics when I get home.


FYI for the 3rd gen guys - I will be building wiring harnesses this summer that will let you run a TPI(or any other port injected SBC) with the 411 LS1 computer. It will make your car OBDII, sequential port injection, all kinds of other benefits to this swap, but the biggest one will be tuning, almost nobody out there does Dyno tuning for PROM based stuff and even if they do its really hit or miss. With this harness the car will be tuned just like an LS1 4th gen.

that would make a great swap for those guys.
how much do you think those harnesses will end up costing?

[Josepy]

All i have at work here.

god i love your GTA

[loud91rs]

Here are mine:
Just after I got it from Indiana, haven't done anything to it yet it kind of turned into a DD because the 305 gets better gas than my hemi.


Pics of my 85 when I bought it, it is now at the bodyshop for a few minor things I'll post pics when I get it back.

[Cutlass Queen]

I bought an 85 Iroc Z towards the end of summer last year. Nothing worth bragging about with pics though. Figure this is the next project once I graduate soon

[HY35F2T]

im still not sure if i want a gta/or firebird formula ws6 ugh.

[BadAzzGTA89]

im still not sure if i want a gta/or firebird formula ws6 ugh.

For mods i just got all the free ones plus bigger injectors,runners,ported plenum,adj fuel regulator,bigger cam,exhaust,ram air and a few more
Still need a tune with the mods but soon will be doing what Ponykiller stated for the computer upgrade

As for what car to get i say GTA!
WS6 features included 36mm front and 24 mm rear stabilizer bars, special Delco gas-charged shock absorbers, specially- tuned coil springs (96 lb./inch front and 23 lb./inch rear), four-wheel disc brakes, limited-slip rear axle which is a Borg Warner 9-Bolt Axle Ratios were:
1987:
2.77 : 1, 3.27 : 1
1988:
3.27 :
1989:
3.27 : 1
1990:
3.23 : 1, 3.27 : 1
1991:
3.23 : 1, 3.27 : 1
1992:
2.73 : 1, 3.23 : 1
Aluminum drive shaft
There are more specs just do a search and see ya at 3rd gen fest

[Karps TA]

[Cutlass Queen]

Nice looking rims on it

[Karps TA]

Nice looking rims on it

Thanks Although for some reason they look small in the pic.

And yes, a Camaro spoiler on the bird. I really didn't like any of the bird spoilers, and none of them seemed to even out the hood like the Z28 spoiler did. Plus at the time I did it the only option for a wrap around spoiler was the GM piece at around $800.

[Poncho]

Camaro spoiler on a Firebird? Nice touch.

[PonyKiller87]

These are all pretty old, but it still looks pretty much the same.

[Cutlass Queen]

These are all pretty old, but it still looks pretty much the same.

Damn it Kev, now you've got me wanting to fix the Iroc up rather than the Cutty. grrrr. For anyone who's curious...this is how mine looks minus the fancy tlc work right now haha. Kev's got me on fade

btw are those the diamond headlights and fog lights on there?

[PonyKiller87]

Damn it Kev, now you've got me wanting to fix the Iroc up rather than the Cutty. grrrr. For anyone who's curious...this is how mine looks minus the fancy tlc work right now haha. Kev's got me on fade

btw are those the diamond headlights and fog lights on there?

Wait till you see it this year, rims are getting blacked out, tail lightes getting smoked, windows tinted... If it makes you feel any better that pic was taken right after I put the engine back together, before I turned the key, it hasnt been that clean since then, lol.

The headlights are either the normal or silverstars, cant remember. Fogs are the diamond blue but there not on the car anymore, they block to much of the ram air