So far I have:
98 4.6 Teksid block
- Standard bore
2003 PI heads
- PI cams
I plan on getting (don't have) a forged cobra crank, H-beams, and possibly 18-23 cc pistons depended how the deck comes out. The PI heads are only going to get mild port for gasket matching and taking the lump off the camber. Keeping the PI cams. Meziere electric water pump and high flow FRPP oil pump with SHM gears as well. Upgrading to the 9 PSI pulley along with 40 # injectors and 90mm MAF.
If anyone has or know of parts or just want to be helpful I'm always open for suggestions and comments.