Results 1 to 7 of 7
  1. #1

    12 GA. Rust/ Pitting removal help.

    I aquired a Mossberg 12 GA. from my father that bought it for me out of the blue.

    Well the barrel is a little bit rusty/ pitted on the outside and I was wondering what I can use remove the rust and the pitting?

    I've seen that I could use a Blueing/ Rust removing kit, but I understand it could be tricky if you don't know what your doing.

    It doesn't look like the barrel would be need to be resurfaced.
    In and outside of the chamber is fine.
    'Merica, Hell Yeah!

  2. #2
    Resistance is futile. STANMAN's Avatar
    Join Date
    Jun 2007
    Location
    U will be assimilated.
    Posts
    4,914
    Quote Originally Posted by WhiteThunderZ28 View Post
    I aquired a Mossberg 12 GA. from my father that bought it for me out of the blue.

    Well the barrel is a little bit rusty/ pitted on the outside and I was wondering what I can use remove the rust and the pitting?

    I've seen that I could use a Blueing/ Rust removing kit, but I understand it could be tricky if you don't know what your doing.

    It doesn't look like the barrel would be need to be resurfaced.
    In and outside of the chamber is fine.
    Flitz Metal polish and a good quality oil to dilute it with. Should work wonders. It will take it down to bare metal though, as the rust has eaten away the phosphate finish (or blueing if it's an older Mossy). You can TRY a blue touch up pen, but I never liked the look. Just keep the area well oiled and use it as is!!

  3. #3
    Resident Hornet guru USMARINE1108's Avatar
    Join Date
    Feb 2005
    Location
    New Berlin
    Posts
    1,753
    OOOgr steel wool and some CLP will remove light rust. You could even use a clean soft rag and some CLP depending on how much rust there is.
    Last edited by USMARINE1108; 01-07-2008 at 08:44 PM.

  4. #4
    Breecher_7
    Guest
    You can blast the barrel with a fine media as well then refinnish it.

  5. #5
    Dusting off my knick knack... MurphysLaw88GT's Avatar
    Join Date
    Oct 2005
    Location
    Under a bridge
    Posts
    2,510
    parkerize it....

  6. #6
    I really dont wanna refinish the barrel... But I guess Im going to have to check into it though.
    'Merica, Hell Yeah!

  7. #7
    I got my refinishing kit at Gander Mountain but I also found my barrel for my Mossberg 12GA 500. They wanted $220.00 for just the damn barrel with 2 chokes... So I checked out the shotguns and I found my same gun for $259.00 I'm like WTF.

    Anyone knows some private dealers? There used to be one in South Milwaukee that had his business in the basement, his nake was Kenoyer (sp?)
    'Merica, Hell Yeah!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •