Gm Performance parts bowtie block.
Chevrolet 90 degree v6 engine family.
Iron block with siamese bores.
current bore 4.080
max recommended bore 4.155
standard mains with nodular four bolt caps
drilled for v8 oiling
lifter bushings installed
max recommended stroke 3.875
block is in finished condition ready to be used
would make and excellent base for the cyclone or typhoon guys or anyone building a high performance v6 enginer.
was a pull out from a goodies dash car when the series broke up. Can be used either as wet or dry sump.
asking $1000 obo always open to trades as well
contact me through pm or respond to this thread.
Thanks,
Patrick Dillman
Results 1 to 6 of 6
-
07-19-2007, 12:08 PM #1have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
GM Bowtie v6 Block Cyclone Typhoon
-Patrick
I r teh have da kewl now cuz of that ^^^^^^
"It's not a racecar if it drives to the track and goes home on a flatbed apparently"
-
07-19-2007, 04:47 PM #2Full Street Trim
- Join Date
- Jul 2003
- Posts
- 2,464
PM Sent on the block.
Have you got any other parts? Any 23 degree heads? I race a GMC Syclone.Last edited by Syclone0044; 07-19-2007 at 08:10 PM.
Josh
91 GMC Syclone, full street trim, full accessories, stock bottom end.
11.45 @ 117.7 57mm PT51 turbo at 20 PSI, 93 octane street tune w/alcohol injection. D.I.Y. Budget build, <$4500 under the hood complete.
-
07-19-2007, 11:54 PM #3Resident FIB
- Join Date
- Jan 2003
- Location
- MSOE/elk grove VILLAGE, illinois
- Posts
- 194
sounds sexy, but i think its missing 2 cyl
slicks only, next week..u goin. think we are bringin the fantaz
Bill Pankiw
-1994 Z28 A4 white
-1967 Chevelle SS (complete frame off resto)GW tubular susp,Blueprinted LS6 454, M21,ralley's.......OLD school (SOLD to a local)
-
07-19-2007, 11:55 PM #4have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
I just sold of the last set of brodix 23 degree heads I had on ebay along with a tunnel ram.......I'll see if my austrailian friend has some lying around he wants to part with
Originally Posted by Syclone0044
-Patrick
I r teh have da kewl now cuz of that ^^^^^^
"It's not a racecar if it drives to the track and goes home on a flatbed apparently"
-
07-22-2007, 11:46 AM #5have pot, will stir
- Join Date
- Jun 2007
- Location
- the far west side
- Posts
- 3,061
Pictures
What appears to be rust on the deck is actually dried grease and can be easily cleaned off
Still as pretty as when I put her in the corner
-Patrick
I r teh have da kewl now cuz of that ^^^^^^
"It's not a racecar if it drives to the track and goes home on a flatbed apparently"
-
08-09-2009, 05:04 PM #6Newbie
- Join Date
- Aug 2009
- Posts
- 1
bowtie block
do you still have the block?
Reply With Quote