If you have any THIRD GEN Camaro parts, or compatible 4th gen stuff (such as seats and seatbelts) PM me with an offer. I have a huge project car on my hands that i want to really get done soon!
Thanks guys,
Jeremy
If you have any THIRD GEN Camaro parts, or compatible 4th gen stuff (such as seats and seatbelts) PM me with an offer. I have a huge project car on my hands that i want to really get done soon!
Thanks guys,
Jeremy
I remember saying the exact same thing.... 4 years later...
-Tyler
Don't drink and Post!
1991 Camaro, LS1 Powered -- 2000 Silverado 1500Originally Posted by BadAzzGTA89
I have doors
iPedal : AIM:BMXpORK : Milwaukee, Wi : SUICIDEDOORS
"You cannot help people permanently by doing for them, what they could and should do for themselves." -Abraham Lincoln
Davemc is the guy to go to for thirdgen parts in Milwaukee. I'm amazed at how much he has.
Online Drag Racing -------Reaction Time Tester!
Red 1982 Trans Am MSE Hooker 1 5/8, 3 inches back, 3:73s ---- Red 1990 Formula with ZZ4 motor, Hooker 2055s, American Thunder catback ---- Black 1991 GTA with 3 inch Flowmaster Catback system ---- Black 2002 WS6 Bone Stock
Suck Squish Bang Blow
I have a 4th gen center console in charcoal/medium grey color. It's the lower part only so you'd have to get the upper part either automatic or stick, from somewhere else. shouldn't be too hard to come by. My old roommate put one of these in his 86t/a, didn't look too bad. I don't know if there'd be any modifying needed of the upper part.
I'm moving in a couple weeks and it would be nice to NOT have to haul this along. It's yours for $30
thanks
I've got a 97+ camaro dash in great shape that i don't need anymore. they look badass in thirdgens...i'll even let it go cheap
12 Suzuki Hayabusa Turbo
12 Suzuki Hayabusa LE
04 Pontiac GTO
72 Pontiac GTO
djbuschke -Ill look into the center console and see if it would need modifying and if I can find the upper part to complete it.
Loud91rs-97 dash pad? Black? Pm me with how cheap.
Thanks guys
Well anyone else got any thing laying around or a project car their trying to scrap id appreciate it guys!
well i don't know exactly what your 'project car' is, other than a 3rd gen, so i'll throw this out there also:
I have a Weiand X-CELerator intake. It's either part #WND-7546 or WND-7547-1. i am 99% sure it's the latter one of the two. You can check out the specs on summit website. it's a single plane, 4-barrel, square bore, open plenum, intake that makes good power from 2000-6500 (depending on which actual intake it is... it just changes the RPM range a little) - i could tell you for sure, but it's in the garage packed in a box with the rest of my things, I'm moving to Sturtevant in a couple weeks.
Let me know if you'd be interested, It's used but in nice shape... a little brake cleaner would bring it back to new looking status. I'd like to see around $75 for it. (retails for $129 so I think that's fair)
I got a Trans Am style automatic shifter handle with the little "C" clip........$13 shipped(I am about 1.5 hrs from MIL.). Here is a pic of it installed in my car: http://rides.webshots.com/photo/2938...47558762ZYfsyH
Thats all I got, I know I suck!!!
I've got a fiberglass '83 Z/28 hood that I've been sitting on forever. take it!
Well, at the very least, I have an interesting back story.
That intake is pretty bad ass, i do have an edelbrock intake but i dont think it would perform as nice as that one. The shifter knob looks sweet, but the hood ill have to pass on sorry but tuesday im making a drive to pick up a 4 inch cowl hood .
Around June 10th i will be arriving in Milwaukee so that will be the time i will pick up parts,just as an fyi i am interested in the intake and shift knob.
Thanks guys,
Jeremy
I have good doors, with good grey door panels.
New comp engineering 3 way drag shock.
Hedman long tube headers slight surface rust.
90 rearend with richmond 3.73s and rebuilt auburn LS with new rear drum brakes
Control arms with new ball joints pressed in them
Eibach sportline lowering springs
34mm front sway bar.
In other words im parting out my 90 iroc roller before i scrap the body (rusted out).
87 Chevstang in progress
91 escort
94 bravada
i've got a Hawks replica notchback...
Jeremy, i just wanted to let you know that i shuffled through all the moving boxes in my garage and grabbed the intake before we loaded our u-haul. it's sitting in my trunk right now, so i'm good to go whenever you come into town, just let me know
thanks
Duane
well let me know if ya want any of the stuff
87 Chevstang in progress
91 escort
94 bravada
Should just buy my car listed on here. 4-wheel disc, 600 miles on 700R4 and 350. Newer exhaust, clean body. Only rust is a freak hole behind T-top weatherstrip. Have entire panel to replace but I would just put in small patch. 1inch x 2inch maybe.