well finally got all my motor parts......
hypernetic 8.5-1 comp pistons
moly rings
clevet bearings
new head
and everything else is new too
here are a few pics, hopefully i will install it tomorrow!
note my awesome hone job!
well finally got all my motor parts......
hypernetic 8.5-1 comp pistons
moly rings
clevet bearings
new head
and everything else is new too
here are a few pics, hopefully i will install it tomorrow!
note my awesome hone job!
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride
letting the car thaw out for tomorrow!
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride
Looks good and that was quick!
Owner of Sunset Self Storage LLC. LET ME KNOW IF YOU NEED STORAGE. 24/7 access. No Contract length. Self Storage/Portable Storage/Vehicle Transport
Thanks, Brad 262.751.9439
09 Cadillac CTS V Has some stuff done...
05 Chevy Duramax: Best time in 4wd was 12.22 @ 108
99 Harley Davidson Ultra Classic: Big Bore, Cams, tune.
looking good man!
hopefully that garage is heated!
Originally Posted by 88Nightmare
i like the lightning bolt on the pistons but not as much as all that snow on the satty lol. i cant wait for the day we line them up. looks good.
ready to help me with mine now??? lol.
1968 Camaro 383
im surprised you didnt deck the block to make sure it is perfectly flat.
Check out our NEW online store!
http://store.clocksoffracing.com/
it didnt need it... i measured it!
its the original motor... it only had 79k on it. every single bearing in that motor was perfect and all it needed was a hone and a little bit of a ridge reem... even then it really didn't technically need it but when you put pistons and new rings in, its a good ideal. the cylinders were a little glazed but you could still see the factory hone job.
Last edited by sloLs1; 02-04-2007 at 01:19 PM.
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride
nice job, i like how you put in new forged pistons and not boost a stock engine and blow it up.
i blew up 2 stock engines one because of a timing problem the second with just seeing how much boost it could take(i made 4 or 5 runs with 13 psi befor it went!)
and there not forged.... there hypernetic. forged are way too expensive and would be over kill for what i am doing! stock rods can only handle 250whp on a good tune. soo i am limited to 200-220 whp. the hypernetic's are light weight and seal really good. they are overall a better daily driver set-up then a forged set-up would be. which is fine, its a saturn.... NOT A RACE CAR
Last edited by sloLs1; 02-04-2007 at 09:28 PM.
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride
/\/\
But it's kindda like a saturn no matter how quick it is it's still just a saturn/lawnmower.
Originally Posted by 88Nightmare
for sure... thats why i could careless... everything i do is out of boredem! nothing i really really want to do. My evo on the other hand was something i wanted to make nice and go fast. i did. right now i am just having fun with other stupid things!
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride
you would have been better off with the stock cast pistons....
hypereutectic are fine for n/a but with a power adder,you better be on top of your tuneup...............
those are very brittle.
Check out our NEW online store!
http://store.clocksoffracing.com/
stock are weak and have a really small ring land on the top. they tend to crack more easily then the ones i have. stockers are 9.5-1 and these are 8.5-1. also if i can get a pic i will set the stockers vs the new ones. they arent anything much over stock as i implyed earlier. these were actually cheaper then getting a factory replacement piston! also i am not making a rocket ship.... just a "quick" dd
Last edited by sloLs1; 02-04-2007 at 10:47 PM.
'95 saturn < v8 GONE!
'09 avalanche < tow rig
'05 ion < DD
'63 chevy ll < new project
Some girls do want an 8 second ride