studder box question

[junk mx6 no rly]

im using a sc60 on a 4cyl but im pretty sure i wont build boost for **** in first gear from a dead stop so i was wondering how do i go about getting one do i just get a msd6al?is there something else i need ? im new to this **** so any help ill be thankfull for.

[sloLs1]

nitrous works good too!!! the only thing i can think of is a stand alone EMS that would have it built in... there may be other ways around this....

You can do it like i did with my saturn(SC61 turbo) i just sat there bouncing it off the rev limiter and that seemed to help but not quite enough!

[junk mx6 no rly]

yeah megasquirt has it but im not going that way yet this year wanna see what i can do with the factory ecu and chip.I know lilevo had it but that was prolly with his standalone.You knwo where i could get a t3 flange welded on to a stock cast manifold?

[theavenger333]

waiting for williamz to post on teh studderbox

[junk mx6 no rly]

guessing he had it on a dsm?didnt he used to own one?

[twicks69]

You can use a MSD box that has ignition retard controls to do it; you don't really need much else.

The DSM's that had it i think all ran AEM EMS or DSM Link.

[junk mx6 no rly]

could you show me a link on jegs or summit of what excatly i need.

[WilliamZ]

mmmm studderbox... Oh how I miss the studder. Hmmm the TA should have studder.. I had it in a few DSMs I had. It was programmed in the stock ECU and then just hooked up a clutch wire. What car is this for?

[junk mx6 no rly]

for a 88mx6 gt

[junk mx6 no rly]

got it welded on the flange

[junk mx6 no rly]

front of the car head lights r out and the front bumper is just sitting there waiting for my intercooler in the mail.


got plans for the bottle in there .

one last pic.


I know i got some work to do but i dont plan to get it done well body work done this year i just want to get the turbo setup going and running. Anyone know where i can get a t3 flange welded to the stock cast manifold?

[junk mx6 no rly]

ehh show pics of my car and ppl stop replying.lol

[GTSLOW]

Uh wow, thats gonna be sick!

[junk mx6 no rly]

yeah i just need to get this manifold welded to my t3 flange done, otherwise im gonna take it to a shop that can make me a ramhorn style header with the t3 flange on it.hopeing for low 12's on 10psi

[junk mx6 no rly]

so can anyone answer the studder **** question id really liek to get this **** order this weekend?

[UnderPSI]

Get it together and running first. Lots of things need to be done before you even have to worry about that. Good luck.