Results 1 to 6 of 6
  1. 06-14-2006, 05:43 PM #1
    SloFarmTruck
    SloFarmTruck is offline
    Post whore Space Invaders Champion Pop-Up Killer Champion Rotation Champion Space Hunter Champion SloFarmTruck's Avatar
    Join Date
    Jun 2003
    Posts
    778

    Parts from the farm truck.

    15" 5x5/5x4.5 bolt pattern GM unilug rims with tires. the fronts are 15x7 with 205 60 R15 tires, the rears are 15x10 Mickey Thompson MT 1150-15 Indy Profile tires that measure 12"s across.
    The rears are fairly warn in the center.
    I am asking $150.00 for all 4



    Lakewood Traction Bars As far as I know they only fit the full size trucks. Mine was an 84 chevy c/10. I can measure length if anybody needs. These were installed for 2 races in which I shattered my U-Joint..needless to say they worked well.
    I am asking $50.00 for these.


    Last for now is my .030 over 472 caddy motor. This engine has about 6,000 miles on it. at the most. It has only seen nitrous a few times since the truck recieved a larger engine for its racing career. Engine was machined and assembled at C&S Performance and has an Edelbrock Intake along with a Comp Cams cam. I will post the specs shortly. trans is not included.
    I am asking $1700.00 o.b.o for this. SALE PENDING!!



    Any questions please p.m. me or email me at clawson472@netzero.com
    Last edited by SloFarmTruck; 06-15-2006 at 11:57 AM.
    Reply With Quote Reply With Quote
  2. 06-14-2006, 05:47 PM #2
    SloFarmTruck
    SloFarmTruck is offline
    Post whore Space Invaders Champion Pop-Up Killer Champion Rotation Champion Space Hunter Champion SloFarmTruck's Avatar
    Join Date
    Jun 2003
    Posts
    778

    472 caddy engine

    Here is a small vid of the 472 engine with a 100 shot of N2O and some crager ss's with 12" wide BFG tires..started from around 20 mph!! Remember the truck weighed 4600 lbs and is on 87 octane pump gas. This set up went 14.2 all motor and before the U-Joint
    snapped went 12.9 @ 110 with a 1.9 60 ft on a 150 shot.

    Last edited by SloFarmTruck; 06-14-2006 at 09:52 PM.
    Reply With Quote Reply With Quote
  3. 06-14-2006, 06:07 PM #3
    68RR440
    Guest
    Dude, thats a bad-ass video!
    Reply With Quote Reply With Quote
  4. 06-14-2006, 10:11 PM #4
    DFJ6000
    DFJ6000 is offline
    Grrr DFJ6000's Avatar
    Join Date
    Aug 2004
    Location
    Franklin
    Posts
    334
    Send a message via AIM to DFJ6000
    just wondering, how hard would this engine be to fit into a 71 nova?
    I was a Soldier, I am a Soldier, I will always be a Soldier
    Reply With Quote Reply With Quote
  5. 06-14-2006, 10:54 PM #5
    SloFarmTruck
    SloFarmTruck is offline
    Post whore Space Invaders Champion Pop-Up Killer Champion Rotation Champion Space Hunter Champion SloFarmTruck's Avatar
    Join Date
    Jun 2003
    Posts
    778
    Quote Originally Posted by DFJ6000
    just wondering, how hard would this engine be to fit into a 71 nova?
    Not hard at all. buy and throw it in.......

    seriously I have no idea. may want to consult a fab/chassis shop. We made our own engine mounts....well actually Clint at C&S did I just used his
    Reply With Quote Reply With Quote
  6. 06-16-2006, 03:21 PM #6
    hrsp
    hrsp is offline
    "SPECIAL K" hrsp's Avatar
    Join Date
    Apr 2004
    Location
    Milwaukee
    Posts
    5,482
    no...what happened to the one possibility???
    " EVERYBODY HAS A PLAN...UNTIL THEY GET HIT!!!!!!!"
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules