Results 1 to 6 of 6

Thread: Synchros???

  1. #1
    wide the f*** open sloLs1's Avatar
    Join Date
    Apr 2005
    Location
    at work...
    Posts
    2,861

    Question Synchros???

    anyone ever rebuild a 6 speed tranny out of a '98 camaro??? My buddy has one and it grinds goin into 4 and 5.... he's thinking its the synchros?!?!? I have rebuilt trannys before but they were all transaxles!!! is it basically the same??? anything to watch out for??? Thanks for the help!!!
    '95 saturn < v8 GONE!
    '09 avalanche < tow rig
    '05 ion < DD
    '63 chevy ll < new project
    Some girls do want an 8 second ride

  2. #2
    Ol' School BAD LS1's Avatar
    Join Date
    Jun 2003
    Location
    Slinger
    Posts
    7,886
    I rebuild these things. It's either the snychro's are bad yes, or the clutch hydraulics are that bad that the clutch doesnt fuly disengage and is still placing some input through the trans and that will cause a grind.

    You'll need special flat snap ring pliers that take clips off that hold the whole thing just about all together, and its a ***** to assmble if you havent done one before with getting the shift rail lined up. There are two female torx headed studs on top that need to come out that loctite on them that needs to be heated witha torch to get them out w/o stripping the torx out.... Lots of other little quirks too
    2012 Cruze ECO M6 - Crystal Red- Just a little more boost than stock!
    2001 Camaro SS - Rallye Red - In process.

  3. #3
    wide the f*** open sloLs1's Avatar
    Join Date
    Apr 2005
    Location
    at work...
    Posts
    2,861
    cool cool... i'll probily end up doing a full rebuild on the tranny for him.... the car has 106k miles on it ! I will do it in my Drivetrains class here at wyotech on student days... then i can have an instructor help me if needed !!! Thank you for the input!
    '95 saturn < v8 GONE!
    '09 avalanche < tow rig
    '05 ion < DD
    '63 chevy ll < new project
    Some girls do want an 8 second ride

  4. #4
    number1
    Guest
    http://www.ttcautomotive.com/English...ice_Manual.pdf


    service manual

    t56rebuild.com just had a sale for a t56 rebuild kit.

  5. #5
    wide the f*** open sloLs1's Avatar
    Join Date
    Apr 2005
    Location
    at work...
    Posts
    2,861
    thanks for the info... i already have that info available to me at school... i was just wondering if there were any little corky problems people have when rebuilding these trannys!!! thanks for the input!
    '95 saturn < v8 GONE!
    '09 avalanche < tow rig
    '05 ion < DD
    '63 chevy ll < new project
    Some girls do want an 8 second ride

  6. #6
    Lucks Got Nothin To Do With It
    Join Date
    May 2002
    Location
    GLD
    Posts
    185
    Ya just busted the 3rd gear blocker ring on my car an the syncro's were all chewd up from beating the car for 4 years

    yes getting the shift rails lined up is a *****, well I didnt do it but the guy at work had fun doing it or me, lol. I'll see in the morning how good of a job he did when I go for a ride with it.
    The other quirk is one of the gear sets is pressed on and can be a real ***** to remove if you dont have the right puller.

    T56rebuild.com good place had my stuff next day for only 15 bucks more. They know there **** there.
    Last edited by Jake B. (Killer Quad); 04-17-2006 at 11:17 PM.
    '91 Grand Am 2.3 H.O. m5
    11.98@114.59 happy gas

    '02 Trans Am WS-6 m6
    12.84@109.34 pure stock
    2005 Summit Series Street Class Champ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •