03 ecsb z71, 5500 lbs. 5.3 8 to 10 pounds of boost by a t4/t66 with a 1.09 a/r. 3.73 gears, 3200 stall converter, anything else u need just ask
Thanks
Type: Posts; User: Sleeper Sierra; Keyword(s):
03 ecsb z71, 5500 lbs. 5.3 8 to 10 pounds of boost by a t4/t66 with a 1.09 a/r. 3.73 gears, 3200 stall converter, anything else u need just ask
Thanks
the gasket probably wasn't lined up correctly.
I am building a 5.7 aluminum engine. diamond 3.905 pistons, wiseco 39050gk rings i am getting conflicting info as to what i should file the rings to. I was thinking .022 and .024. diamond says .o27...
congrats. its about damn time.
max bore on a 5.3 is 3.905. the stroke is 3.622 stock. i don't know what you mean by dirt cheap. but if you decide to go this route i have a 5.3 block, crank and main caps that is alreadt @ 3.905...
call brad. 262 692 9035
I would do it on the side. call my cell 262 685 7251. is it the seal at the rear driveshaft or between the trans and t case?
most tool trucks have one. i have one i could loan you if needed.
condensation
i could do it, alldata calls 4 8 hours i could do it for 350 plus parts. give me a call 262 685 7251
goin down saturday if the weather holds up.
it will idle higher or die with the carb cleaner
intake gaskets most likely pretty common on these trucks. I am laid off i could take care of it for you this week.
a 1 in the ghetto in milwaukee here is the info.
3453 N 35th St
Milwaukee, WI,
53216-3787
Phone: 414-445-9996
last time i had them shorten a shaft for me it was about 150.
I was driving on hwy 45 yestarday. had the cruise set at 72 and all of a sudden the engine revved and the trans no longer pulled. I coasted about a mile and pulled over. No reverse no forward,...
they were very proud of me and my carnage
so I went to pick up my truck today. ATD is awesome. they warrantied my trans. The internals were all junk, the drum ballooned, the sprag stripped, and the planetary exploded and is in about 5...
so, Tom got my truck running correctly and the next day, I grenaded the sprag in the trans. So now I am back to sharing my wifes mazda. I had the trans built by ATD in july so I Have it there and...
Thanks again Tom. Truck is unbelievable, I thought 13.0 was fast before Tom fixing the tune. This truck is now stupid fast, I love it. It is definitely going to be a handful in the snow.
not the dpfe, that would be a p0401. most likely a vaccumn leak
I have a converter for you it is a 3000 stall with lockup.
i've gat a 2500 stall and a 2800 stall i will take 75 for either one.
if you have any pics of the white gmc that would be great i would love to see the et or any other shots you may have, thanks.
had a great time today ran a 13.058 in a 5500 pound truck, I am satisfied with that for now. thanks.
any pics you can get of my 03 gmc launching and some et shots would be great