Project " BOSS RAPTOR 700 " pics and progress..

Here is my 2007 700 GYTR Raptor....I wanted to post some pics of the mods progress I'm doing to it....I have a sheetload of parts that are going on it...

This picture is of it 100% stock...I already had ideas of how to mod it at that point...



http://i37.photobucket.com/albums/e9...m/000_0939.jpg







These pictures are it with ITP SS rims and Holeshot tires , Trailtech Vapor computer dashboard ( tach - temps - speedo , odometer , hour meter ect ), GYTR shock covers, GYTR front bumper and GYTR " blue paint drip " Raptor 700 graphics kit added....I will add pics as the mods go on...It will look and ride pretty different with the mods I'm doing to it....

http://i37.photobucket.com/albums/e9...m/000_3310.jpg


http://i37.photobucket.com/albums/e9...m/000_3311.jpg


http://i37.photobucket.com/albums/e9...m/000_3312.jpg

Wow!!!

Im not into 4 wheelers, but that thing looks SWEET!

now that is pretty wicked!

Here are some pics of the Vapor computer and dashboard on it...

The Vapor computers are GREAT !


The latest concept in motorsport on-board computation. A combined effort from experts in software, electronics, and mechanical design - each feature of this 4th generation product is carefully crafted and constructed with the offroad enthusiast in mind.
Speedometer
Tachometer
Temperature
Distance
Clock
Power


http://i37.photobucket.com/albums/e9...m/000_3314.jpg

http://i37.photobucket.com/albums/e9...m/000_3315.jpg

that looks badass! how much did the gauges run you?

Flick, the Trailtech computer and billet dashboard was just over $250.00 ...You could save money and just bolt it to the handlebars with the supplied parts but, I spent the extra $150 for the dashboard to give the computer some protection around it...


Trailtech vapor computer = $ 110.00

Billet handlebar clamp and Vapor dashboard = $ 150.00

Here is the aluminum airbox I got for the project...


http://www.cfmracing.com/fullsizeimg...700-airbox.jpg


It's a large 4 inch inlet with a K & N filter that replaces the stock very restrictive factory airbox and filter.....

The new 1 quart larger aluminum oil tank . The factory one is a stamped steel tank..


http://www.cfmracing.com/fullsizeimg...00-oiltank.jpg

those rims look bad ass!! Sweet wheeler

Damn that's nice!!!!

never thouhgt id say this about a raptor, but it loks pretty nice!

I will post some pics of the Raptor with the new 4 inch all around lowering kit on it...I have to take the rear strut to work and have the bushings pressed into it before I can install it on the ATV....This thing will look much better with the 4 inch drop as the 700's sit too high from the factory..it will sit like a YFZ 450 when I'm done dropping it down...I want to see if GLD has any days I can take the Raptor out and run it down the track?


I do have a lot of performance mods going on..I'm doing a stage 3 build up on it...

/\/\/\ test and tune they will let you run 1/8 my buddys yfz i think did a best of 9.3x's if i remember correctly. and that was my biddgest complaint about the raptors, they looked/ rode top heavy. let me know when you head to GLD, id like to take my predator down now that the new motor is in

Quote:

---

Originally Posted by 70 cutlass 442

/\/\/\ test and tune they will let you run 1/8 my buddys yfz i think did a best of 9.3x's if i remember correctly. and that was my biddgest complaint about the raptors, they looked/ rode top heavy. let me know when you head to GLD, id like to take my predator down now that the new motor is in

---

I will do that and thanks for the info ! I know Boss LX just picked up a Banshee and I'm sure he will run GLD with us !

I added a adjustable lowering kit to the Raptor 700 today.


I set the suspension height to the same as a new YFZ 450 sits....it worked out to be 4 inches drop in front and 3 1/4 inches drop in the back...


Here are some pics with the new drop height....The next mods going on will add some pretty nice HP to it ....:banana1:


http://i37.photobucket.com/albums/e9...m/000_3316.jpg

http://i37.photobucket.com/albums/e9...m/000_3317.jpg

looks real nice, will that affect the steering at all? my predator has the pro steering from the factory which works great with lowering kits, but wasnt to sure how other sport quads worked with it?

i'd run at gld with my banshee if the rest of ya went with the quads

Quote:

---

Originally Posted by slow90z

i'd run at gld with my banshee if the rest of ya went with the quads

---

For sure!

Yea, it would be pretty cool to have a bunch guys on atv's running down at GLD at the same time!

tom the raptor looks awesome! my quad is all blacked out for now but those graphixs are changing my mind! let evryone know if u want to do a track night.