check in here if you own a diesel!

Kind of like the mustang thing! Who is a member on brew city muscle and owns a diesel list it up here and also modifications to it

i own a 1996 ford F250 with the 444 international powerstroke, truck has 295k original on it as of 6/28/09

mods include:
S&B stage II intake
3 inch diamond eye down pipe
custom straight 4 inch exhaust from downpipe back
4 inch mbrp stack kit, 48" tall
edge ez chip 4 position
crank case vent delete mod
plenty of visual mods!!

http://i7.photobucket.com/albums/y29...ocks/psd15.jpg

06 stroke, no problems. knock, knock. All stock baby! exept for tires and a toolbox in the bed, Bull bar and some KC lites on it. .....Whos looking for trouble?:goof

Bought new, now got about 48 thousand on it. Does everyting I want it to do.

95 E van with the triple four
310k
mods:
rust
more rust
the glow plugs went out a few years ago, so you have to give it a snort of ether if the temps drop below 65.

It's had a million names from the "raper van" to the "rasta van" to the "honda rescue van." It's an old work van with no windows. I've used it to haul dozens of motorcycles. My sister calls it "ginger" due to the vacuum pump brakes.

What is a crankcase vent delete mod?

1996 F-250

7.3L
Stage 1 Rosewood Diesel Injectors
Tony Wildman Chip
4" exhaust
Home Built Intake
Super Duty HPOP 17*
Gutted EBPV
High Pressure Crossover
120v IDM
Swamps Diesel Electric Fuel System
Racer X Valvebody-Stock Torque Converter

http://img357.imageshack.us/img357/563/img0319.jpg

2007.5 (NBS) Silverado 2500HD LMM Duramax/Allison that loves to work and gets 24 mpg on the freeway when it's not.

Quote:

---

Originally Posted by eyeball

What is a crankcase vent delete mod?

---

like the pcv on the powerstrokes, just run the hose off the intake and plug the intake keeps oil out of the air if you wanna call it that

LBZ DMAX

Bought it new in 2007 (Classic Model) and it has nearly 50,000 miles on it already. I'm a little bit of a lead foot - and when I do road trips I usually hang at 75mph. The best mileage I've seen (hand calculated) is 20.47.


http://www.fquick.com/images/vehicle.../727542248.jpg

2004 dodge ram 2500 laramie w/ the 305/555 cummins. 4" silverline exhaust and diablo predator programmer.

Great truck, plenty of power and awesome on fuel.

04.5 chevy silverado 2500hd ec/sb lly d-max allison....ppe hot +2 accelerator programmer, gutted cat with custom side pipe, k&n cai......soon to come bully dog shift kit......right now mixed driving gets about 18-20......straight freeway is roughly 23-25.

2000 Dodge CTD, 1 ton, long box dually. 157,000 miles.

Edge juice with attitude, 5inch exhaust, Big air filter, HTS valve body.
It was my work truck and I bought it from my employer.

http://i5.photobucket.com/albums/y19...eddodge004.jpg

Quote:

---

Originally Posted by DoubleAron

2000 Dodge CTD, 1 ton, long box dually. 157,000 miles.

Edge juice with attitude, 5inch exhaust, Big air filter, HTS valve body.
It was my work truck and I bought it from my employer.

http://i5.photobucket.com/albums/y19...eddodge004.jpg

---

What about your fuel system?

Flame Red 2002 Dodge ram quad cab short box 4x4 96k mi. NOTHING stock or factory. "Smokin' RAM"

still being put back togeather now that i have the head figured out.

-ported and polished head with a machined off intake plenuem
O-ringed
110lb valve springs
.020 over head gasket
-port matched PDR t-6 exhaust manifold
-aftermarket "billet blank" cam
-hd pushrods
-arp main bolts, head studs,rocker studs
-180gph Fass Fuel system
-Fluid dampner
-DDP "comp" injectors
-550cc "180hp" P7100 injection pump swap
5,000 rpm govoner springs
custom "0" plate
mack plug
-.120 stainless injection lines
-.120 injector tubes
-NV4500 5 speed
chormolly input shaft
HD hydrolic upgrade
South Bend Clutch "Iron Giant" 4200lb spring load
-borg warner S400sx turbo
2.8in inducer bore 1.10 a/r "79 trim"
- lots of RED powder coating

currently looking for hi 700s for hp


look for the build thread to be updated soon and more then likely moved into here.

http://c2.ac-images.myspacecdn.com/i...965646fd11.jpg
http://c4.ac-images.myspacecdn.com/i...c13050eec3.jpg

1992 VW golf GTD Special

1.6L of turbo intercooled diesel power!
its my DD all in Kilometers. car is imported from Poland and i currently get 45-50 mpg
NO power windows, locks, moon roof, steering
BUT does HAVE power adjusting headlights :goof

-reworked injection pump by me
-muffler deleted
-air box "swissed cheesed"
-96 VW jetta wheels
its murdered out
http://i157.photobucket.com/albums/t54/mx_114/vwww.jpg

Quote:

---

Originally Posted by doublearon

2000 dodge ctd, 1 ton, long box dually. 157,000 miles.

Edge juice with attitude, 5inch exhaust, big air filter, hts valve body.
It was my work truck and i bought it from my employer.

http://i5.photobucket.com/albums/y19...eddodge004.jpg

---

i want this as my tow rig aaron!!!

Quote:

---

Originally Posted by SmokinRAM114

Flame Red 2002 Dodge ram quad cab short box 4x4 96k mi. NOTHING stock or factory. "Smokin' RAM"

still being put back togeather now that i have the head figured out.

-ported and polished head with a machined off intake plenuem
O-ringed
110lb valve springs
.020 over head gasket
-port matched PDR t-6 exhaust manifold
-aftermarket "billet blank" cam
-hd pushrods
-arp main bolts, head studs,rocker studs
-180gph Fass Fuel system
-Fluid dampner
-DDP "comp" injectors
-550cc "180hp" P7100 injection pump swap
5,000 rpm govoner springs
custom "0" plate
mack plug
-.120 stainless injection lines
-.120 injector tubes
-NV4500 5 speed
chormolly input shaft
HD hydrolic upgrade
South Bend Clutch "Iron Giant" 4200lb spring load
-borg warner S400sx turbo
2.8in inducer bore 1.10 a/r "79 trim"
- lots of RED powder coating

currently looking for hi 700s for hp


look for the build thread to be updated soon and more then likely moved into here.

http://c2.ac-images.myspacecdn.com/i...965646fd11.jpg
http://c4.ac-images.myspacecdn.com/i...c13050eec3.jpg

---

Sounds weak, I'll take some of that action.

2005 QCSB RAM 2500 Big Horn, Cummins 325/610, stock for now... :)

^^^ atta boi!

Too much money in it.

Quote:

---

Originally Posted by JohnnyT

2005 QCSB RAM 2500 Big Horn, Cummins 325/610, stock for now... :)

---

if you ever want to "try before you buy" let me know i can get my hands on almost ANY downloader:thumbsup

Hopefully over winter smokn ram can make old blue a little more power .... go from building cars to diesel race trucks lol

i have a new found respect for diesel street truck pullers DAM!!! i never heard a duramax spin 8000 rpm before ....lollololo

Pictures of my whip...quite a bit late

http://tschritz.mylha.com/images/dodge/HPIM0095.jpg
http://tschritz.mylha.com/images/dodge/HPIM0096.jpg
http://tschritz.mylha.com/images/dodge/HPIM0097.jpg

It came with a sno-way 29 series HD 8' stainless plow and a matching cap which I have back on for now.

Quote:

---

Originally Posted by scottie K

Hopefully over winter smokn ram can make old blue a little more power .... go from building cars to diesel race trucks lol

i have a new found respect for diesel street truck pullers DAM!!! i never heard a duramax spin 8000 rpm before ....lollololo

---

http://www.youtube.com/watch?v=RNlw16ORpAQ

rumor has it there is a 04 3500 cummins rollin around town that clicked off a 10.83 at gld a few weeks ago :stare :)

Quote:

---

Originally Posted by SmokinRAM114

if you ever want to "try before you buy" let me know i can get my hands on almost ANY downloader:thumbsup

---

Damm, I wish I would have gone in here sooner. I bought a Banks 6-Gun with Speedloader but haven't gotten the chance to install yet...