BCM welcomes Midnight Hot Rods!

Printable View

03-03-2011, 12:21 AM
Cryptic

BCM welcomes Midnight Hot Rods!
I stopped in their shop earlier this week and met their crew and saw some of their current projects going on. Including a '76 right-hand-drive Triumph Stag with a SBC V8 and a complete tubular frame/rollcage. Also a '66 GTO that was cut in have to make it 7 inches wider (Yes, the whole car was sawed in half!) with plans for a LS9 power plant. These guys are not afraid to work outside the box.

Here's a bit more about them...
--------------------------------------------------------------------
Midnight Hot Rods specializes in custom metal shaping and metal fabrication, but also do full builds. Their shop is able to handle every part of your project. From transportation to final results.

Midnight Hot Rods' introductory shop rate is $45/hour. Work is based on time & materials. They provide an educated projection of cost and time frame based on your specific project.

Quote:

Originally Posted by Midnight Hot Rods

We don't string people along into a high cost adventure that they may not be ready for. We’re Hot Rodders too. We want you to enjoy the build process, whether it’s one small part to a partial, or full build.

We work on: HOT RODS, CUSTOMS, CLASSICS, ANTIQUES, RACE CARS, SPORTS CARS & MORE.

We specialize in Hot Rods & Classic Cars.

Brief list of work we do:

Custom sheetmetal work (Steel, SS & Aluminum)
Welding (Steel, SS, & Aluminum)
Metal Finishing
Chopped Tops
Channeling
Floor Repair/Replacement
Rust Repair
Trim Repair
Custom Trim
Brightwork
Custom Brackets
Door Skins
Roof Inserts
Quarter Panels
Bodies
Custom Headers
Custom Mandral Bent Exhaust
Roll Cages

Collectively, we have over 40 years professionally working on all types of cars. Including Pebble Beach award winning automobiles and world-class championship winning racecars. We would like you to know that we are meticulous and care about the quality of our work.

Check out past and current projects at:
http://www.midnighthotrods.com
or
http://www.midnightfabrication.com

　
Give us a call, email, or stop in about your project needs.

262-349-9409
midnightfab@hotmail.com

We are located close to the corner of Hwy 164 & Hwy 59 in Waukesha, WI.
111 Wilmont Dr. Unit I
Google Map Link

http://www.brewcitymuscle.com/images..._Hotrods-1.gif
03-03-2011, 01:15 AM
spooln30

Curious, isn't this the same building that OTE Tom was working out of?
03-03-2011, 05:06 AM
pOrk

The guy that runs this shop is named Steve, I used to rent shop space with him in new berlin. The triumph is actually a project crash customs started with and will be painting, steve is doing the mechanicals and tube chassis. If you have time to wait ( a lot of time ) they do good quality work but it takes forever. The stag has been there for 3 years now
03-03-2011, 07:11 AM
Dr.Buick

Looking at there web sight looks like they do NICE work.
03-03-2011, 07:50 AM
xxtremeteam

welcome guys nice looking rides
03-03-2011, 09:01 AM
BigSnailBuick

Nice looking work indeed :) Welcome to the boards!
03-03-2011, 09:03 AM
Yooformula

welcome guys!
03-03-2011, 09:36 AM
Midnightfab

Quote:

Originally Posted by spooln30

Curious, isn't this the same building that OTE Tom was working out of?

Nope, Were just down the road from Tom's old shop. Same side of the road a bit East, in the Blue buildings.
03-03-2011, 09:48 AM
Midnightfab

Thanks for the welcome. We're glad to be a part of BCM and looking forward to becoming more involved with the car community. Feel free to stop in for a visit and check out the shop and cars.
03-03-2011, 10:20 AM
Flicktitty

Welcome guys.

good to see you guys are on here. i will have to stop at your new shop sometime and see how it is.

+1 for these guys they have helped me and Liz out multiple times over the last two years and they do some great work!
03-03-2011, 03:25 PM
Cryptic

Steve told me 10 weeks when I first saw it Monday.
03-03-2011, 03:30 PM
pOrk

Sweet, look forward to seeing that car on the road. The tube chassis looks great and that is a lot of motor in that little car, should be a fun car when its done.
03-03-2011, 05:37 PM
cool_kat

Good to see you guys!
03-03-2011, 05:46 PM
cool_kat

Steve is the most knowledgeable car guy I know. Great Fab work. They helped me out a ton with my coustom turbo seup for my 240. Can't wait to see how that GTO turns out!
03-04-2011, 08:21 AM
Midnightfab

Quote:

Originally Posted by Flicktitty

Welcome guys.

good to see you guys are on here. i will have to stop at your new shop sometime and see how it is.

+1 for these guys they have helped me and Liz out multiple times over the last two years and they do some great work!

How's your car coming along? Heard that you have a new rust free tub.
03-04-2011, 08:24 AM
Midnightfab

Quote:

Originally Posted by cool_kat

Steve is the most knowledgeable car guy I know. Great Fab work. They helped me out a ton with my coustom turbo seup for my 240. Can't wait to see how that GTO turns out!

So, cool_kat are you going to get the final tune on that car this year? There are a lot of screaming horses waiting to get out of there.
03-04-2011, 05:47 PM
cool_kat

hahaha I hope so
04-06-2011, 05:34 PM
Flicktitty

Quote:

Originally Posted by Midnightfab

How's your car coming along? Heard that you have a new rust free tub.

yeah, we thought it was rust free, turns out there is some here and there that need to be taken care of, soon enough it will be done.
03-10-2012, 10:06 PM
pOrk

Quote:

Originally Posted by Cryptic

Steve told me 10 weeks when I first saw it Monday.

Speaking of 10 weeks, ask Steve where the car is now. It AINT finished, and it AINT at his shop. Another local builder took the project on since Midnight Hotrods couldn't handle it. Told you it would take forever if it was left there, Steve is a time waster
03-10-2012, 10:15 PM
nismodave

Is there ANY custom shop Pork does not have a HARD ON for? LMAO!
03-10-2012, 10:52 PM
Lash

Simple answer.......

No.
03-11-2012, 09:07 AM
pOrk

Yup, anothershop.com guys are awesome. Super top notch work, and they don't mislead their customers. But hey, if you guys want to have your project take 4 years to complete and pay 250/month for storage then by all means take them to Steve. He is a standup guy afterall, LOL
03-11-2012, 12:28 PM
BR3W CITY

Quote:

Originally Posted by pOrk

Yup, anothershop.com guys are awesome. Super top notch work, and they don't mislead their customers. But hey, if you guys want to have your project take 4 years to complete and pay 250/month for storage then by all means take them to Steve. He is a standup guy afterall, LOL

I actually googled anothershop.com for shits, and it comes up as a soccer Tshirt website. Unrelated.
03-11-2012, 01:35 PM
PureSound15

It might have been edited :)

Sent from my iPhone using Tapatalk
10-19-2012, 11:45 PM
pOrk

So the car in question that Steve said was going to be done in 8 weeks, well it was pulled from the shop cause NOTHING happened on it. Big surprise huh? Hope nobody on BCM has been taken advantage of by these clowns