Just ordered 3 kits from the site a week ago :confused
Printable View
I just clicked on the link on page one of this thread and they dont come up anymore.huh
Alright I thought I would update this thread, my DDM kit is going strong in Lisas old blazer no issues at all. I bought a kit from Mod Express and last month I had a bulb turn pink, then burned out 2 weeks later. When I contacted them, they asked me to switch the ballasts to make sure it was a bulb issue ( which it was ) and they sent a replacement out right away. Great customer service, although it appears they aren't as cheap as they used to be.
yup my ddm kit is working awsome in my truck. DDM no longer makes the apexcone kits any more. so no more cheap hids from them. they will back all the products warranties tho should there be an issue. i may have to see if i can get the one warrantied for my busa yet. i have a back up set for that in the meantime but would be nice to get that fixed i think it needs a ballast
just had a bulb die after a little more then 2 years. i ordered mine pretty much the day Pork posted this. it was flickering, i thought the headlight was loose. now it died. i guess that's really not all that bad, i moved them between vehicles 3-4 times... ordered a set of replacements, they were like 28 dollars total shipped
I'm having an issue getting power to the ballast. I have everything wired correctly i believe. For some reason its just not firing. the wires for my pin lay out on the hid harness is blue yellow brown. I'm assuming the brown is the ground. Blue is the high beams? I just dont under stand why the ballast are not even getting power.
try flipping the polarity..
How would i go.about that
the plug from the ballast to the factory plug can be snapped in two ways...unplug it turn it 180 degrees and plug it back in...common on gm
I received wires that are not in the female plug. The colors don't make sense to me. Blue yellow brown. My gm harness is grey red black
Trying installing it on a non-leased car? :confused
wiring colors versus factory don't matter whatsoever. the kits are all universal. What bulb type are you plugging in? like said above, reverse the polarity, aka the plug from the vehicle, that plugs into the HID kit. Plug it in "upside down" if you will, they go in either way.
Car is not leased.. It's owned.. And the wires came in the box out of the plug. Ill snap a picture when i get the chanc. its weird
they always come that way. the plastic plug should be in the box, you need to clip the wires in it. they only go in one way
On my truck, I had to flip the polarity of the wires going into the ballast. Light bulbs don't care which side is positive or negative, HID kits do. In a pair, the darker wire is usually -