X303

what you think about it?

i dont know what x303 is...

A ford racing cam grind for a small block ford. Id rather run a comp cam over one of those old grinds.

there are better options if you are going to be spraying, much better

any of the trick flow cams/comp are better

Quote:

---

Originally Posted by 70 cutlass 442

there are better options if you are going to be spraying, much better

---

i am but i dont know what cam to get that goes good with spray.

a comp nitrous grind.

Quote:

---

Originally Posted by HY35F2T

i am but i dont know what cam to get that goes good with spray.

---

any nitrous girnd will work, but you wont have anything off the bottle, if it was me, i would go with a good cam that will make you most HP with what you have on all motor and the spray will just be a bouns.

Quote:

---

Originally Posted by 70 cutlass 442

any nitrous girnd will work, but you wont have anything off the bottle, if it was me, i would go with a good cam that will make you most HP with what you have on all motor and the spray will just be a bouns.

---

well are nitrous cams really worth it?never really learned about them.

Quote:

---

Originally Posted by slow90z

a comp nitrous grind.

---

any in mind?

Quote:

---

Originally Posted by HY35F2T

well are nitrous cams really worth it?never really learned about them.

---

theyre well worth it if your gonna be on the bottle all the time. ive read sometime youll free up an extra 35-50 hp by going to a spray only cam, but thats talking a lot of spray. but you will have a dog with out it so its almost not worth it.

Heres a comp nitrous grind: NX274HR
http://store.summitracing.com/partde...8&autoview=sku

Heres a normal comp grind: XE274HR
http://store.summitracing.com/partde...8&autoview=sku

Both would work good for a street strip car with a stall, gears, and a decent set of heads.